Jump to content
Sign in to follow this  
Forest Road

Points saver or Points slayer?????

Recommended Posts

Forest Road

Come on motor heads I need some input!!!!

I have a newly acquired C-160. It runs well. Just needed some basic TLC. I've been reading up on Kirk's Engine's and Brian Miller's websites and ran across these two products. I'm really curious as to any success or failures anyone here has had using either product. I doubt this tractor will see more than 20 hours a year. but when it does go out it'll be pulling logs or blowing snow, and the occasional kiddy ride. Hence I want to increase its dependability any way I can.

I've seen multiple conversations favoring the points saver.

http://kirkengines.com/index.php#PointSaver

However The Points slayer is tempting. Has anyone tried it?

http://kirkengines.com/index.php#PointSaver

Also is there any benefit to a Bosch Coil vs. a stock Kohler/Delco?

And any opinions as to why to keep it original are valued as well.

Thanks

Share this post


Link to post
Share on other sites
 
Jim_M

No real benefit to running a Bosch coil on a stock engine. I have no experience with the point saver, but I will add that I've never had a problem with points on a Kohler. Clean them and gap them when they need it and they won't let you down.

Share this post


Link to post
Share on other sites
 
bowtiebutler956

I've never had them myself, but I've talked to guys who have, and they said you'll never have to gap, or replace your points again, when using the points saver. I haven't talked to anyone who used the points slayer. :thumbs:

Matt :flags-texas:

Share this post


Link to post
Share on other sites
 
decksetter

I was looking at these lately, the Points Slayer looks interesting. I haven't used one, but I converted my IH Cub to electronic ignition and eliminated the points with a kit from Pertronix (but they don't make a kit for Kohler that I know of). It worked really well! I assume the Points Slayer is similar. The Pertronix kit was really easy to install too.

Share this post


Link to post
Share on other sites
 
smoreau

I have never had issues with points before. They are easy to clean and easy to set. Every tractor that I have seen with a points saver or mag conversions and they look hacked up. extra wires and extra things to go wrong! Points are the most simple way to make a spark for a combustion engine and they are the most easy to fix!

Share this post


Link to post
Share on other sites
 
MarkPalmer

I have never had issues with points before. They are easy to clean and easy to set. Every tractor that I have seen with a points saver or mag conversions and they look hacked up. extra wires and extra things to go wrong! Points are the most simple way to make a spark for a combustion engine and they are the most easy to fix!

I agree with this totally, points are especially easy to set on Kohlers. You can replace and reset the points on a Kohler in a hundredth the amount of time it will take you to troubleshoot any electronic or magneto ignition system difficulty. As long as your condenser is good, the points should last a long while too.

-Mark-

Share this post


Link to post
Share on other sites
 
Forest Road

From time to time its good to be knocked in the head with good common sense! New points, condensor, and coil it is!

Share this post


Link to post
Share on other sites
 
Forest Road

As of 6pm we have a rebuilt carb, new points, and new seals on the fuel pump, breather, and cam gear cover. It purrs really nice now!!!!

Share this post


Link to post
Share on other sites
 
County Agent

I use a Point Saver along with the Dual Super coil from Kirk's on my C-175 puller. It's a great combination and allows for easy timing changes if you ever want to advance the timing slightly..

Share this post


Link to post
Share on other sites
 
smoreau

I use a Point Saver along with the Dual Super coil from Kirk's on my C-175 puller. It's a great combination and allows for easy timing changes if you ever want to advance the timing slightly..

That's fine for a engine that is built up and has some mods done to it and I would recommend it for that. But for a stock engine in a stock tractor not pulling, there's nothing better then the stock points for simplicity of repairs and no benefit from a larger coil.

Share this post


Link to post
Share on other sites
 
Buckshot 1

:) I installed David Kirks points saver on my K321 5 yrs ago and have not touched the points since. Since the condenser is removed with this system, one less thing to worry about. :flags-usa:

Share this post


Link to post
Share on other sites
 
JC 1965

I installed the points saver on my K301 several years ago and have not touched the points, the points still look new and with the points saver it is so easy to set the timing dead on. I have bought several items from David Kirk over the years and he is as honest as they come. If he tells you something you can count on it. :twocents-02cents:

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • Tim's Toy Tractor
      By Tim's Toy Tractor
      Seat, New! Universal Garden Tractor / Riding Mower Seat
       
      This is a new seat that I purchased for a project tractor and never used, it is in Perfect as New Condition.
       
      I have used this seat on a few Wheel Horse tractors, and they have been a perfect fit and look great.
       
      This is a Universal fitment seat; it has multiple mounting holes and mounting patterns for fitment on most Graden Tractors and Riding Mowers.
       
      $49.00  Call Tim @ 1-313-460-8858     (Local Pick-Up Only, No Shipping)






    • Tim's Toy Tractor
      By Tim's Toy Tractor
      Two 3 Rib Firestone Tires, 16x6.50-8, 2 of them mounted on OEM Wheel Horse Rims, NEW!
       
      These tires are New, Never Used! Not the cheap China ones, these are High Quality Firestone Tires!
       
      Size: 16x6.50-8
       
      Great for any Garden Tractor or Riding Mower
       
      They are mounted on original Wheel Horse wheels that have been sandblasted & epoxied, and painted with ivory colored paint, note there are a few chips along the inside bead from mounting the tires. The rims will need your specific size wheel bearings installed.
       
      $99.00 Call Tim @ 1-313-460-8858        (Local Pick-Up Only, No Shipping)
       
       
       







    • Tim's Toy Tractor
      By Tim's Toy Tractor
      C - Series, Hood and Sheet Metal (square black insert) (also known as black hood models) for sale!
       
      This sheet metal set, including C Series Hood, Dash piece, Seat Bracket, and Left & Right-Side Covers, and Left & Right Floorboards was sandblasted, epoxy primed, and painted the OEM Wheel Horse Red Paint.
       
      The painted set is not perfect, a little metal pitting on one of the floorboards, a few little imperfections in the paint here and there as I'm a rookie painter, but this is a nice painted set of sheet metal to freshen up your C Series Wheel Horse!
       
      $140.00 O.B.O. Call Tim @ 1-313-460-8858        (No Shipping, Local Pick-Up Only)

















    • Deer hunter
      By Deer hunter
      Does anyone know where I could find a complete engine rebuild kit from for the k-19 ? I absolutely love my c-195 and have had it for years. But the motor let go last fall and I want to rebuild it or upgrade the motor, any suggestions?
    • BrianStasC-101
      By BrianStasC-101
      Hello all. I am looking for suggestions on adapting the pto from my C series tractor to a harbor freight predator 420 13hp engine. I know the predator motors are a controversial topic however it is the route I have chosen for this particular machine. The intent was to mostly use it for plowing so no PTO required but it would be handy to have. Looking to hear from someone that has successfully done the swap that may offer any advice before I attempt to transfer it over. Just looking for any general pointers that will help me along the way to make it go as smoothly as possible. 
×
×
  • Create New...