Fan Belt for D250

[horsecrazy red 1]

Hi,

I posted this under the Engines forum, but I'm getting desparate so I thought I'd post it here too.

I need to replace the fan belt on my WH D250 but having a difficult time trying to find a replacement. The one taken off measures 3/8" x 47", but it's very old, cracked, and glazed, so measurements aren't exact. Might be metric, too, in which case the width would be 10mm or 11mm. It also needs to be a power drive rated belt.

Any suggestions as to where I can find one?

Thank you!

[clintonnut 126]

Tractor supply has a 3/8" belt. I used the 3/8" belt on the D250 I had.

Charlie

[gwest_ca-(File Mod) 10,551]

The belts listed for the D-250 are contradictory and confusing. This is 47"

251030 WH nla Use 252370 nla [3/8"x47"]

6747 Gates 3/8"x47"

3L470W Napa 3/8"x47"

Garry

[4xfourfun 30]

If you have trouble locating one let me know. I have a box of new D250 parts in the shop and I believe there are a couple small belts in there that may be correct. Send me a message with contact info and I can check.