211-5 Clutch and brake springs

[redhorse86 0]

I recently got an 86 211-5 that recently had the transmission replace but I am unsure how the clutch and brake springs go on. The spring from the idler to the hole above the trans is already in place so I just need help with the other two. If anyone has pics of the springs installed on the tractor that be great.

[redhorse86 0]

I got all of the springs back into position. but now when the engine is running the belt between the engine and trans sometimes slips off when I step on the clutch.

[Kelly 1,028]

I don't know your model right off, but I just did a drive belt on a C-112 vert shaft mower, and it had heavy wire belt guides that helped keep the belt from jumping off, did you reinstall the belt guides?

[redhorse86 0]

All of the guides are in place. Would an upside down pulley on the trans cause this problem?