Jump to content
Sign in to follow this  
Followers 0
1maidenfan

48" belly mower for D series

By 1maidenfan, in Implements and Attachments

Recommended Posts

1maidenfan    203

1maidenfan
Posted

I am looking for a 48" belly mower for my D series tractor, does any one in the central indiana area have one for sale or know of some one that does?

I should be at the mentone meet n greet if some one wants to bring it their.

Thanks.

John

Share this post

Link to post
Share on other sites
 

jdog_kustoms    82

jdog_kustoms
Posted

all you need is any 48 inch deck and switch the caradge to a d series it is a simple thing to do and i think i have about 3 d series parts to do it its only 2 bolts you need to take off and put back on

  • Like 1

Share this post

Link to post
Share on other sites
 

Trouty56    568

Trouty56
Posted

I did it in reverse....a D to a C....Dog is right...switch the front attach bar and the lift stops need extended.

Share this post

Link to post
Share on other sites
 

1maidenfan    203

1maidenfan
Posted

Thanks guys. I found a 48" deck from Scott (whfan74) going to pick it up at the Mentone meet.

jdog, when do you think you'll be able to send the steering column and the parts I need to change the deck over to fit a D tractor? :thanks:

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Similar Content

    • BuffaloD200
      Ark Loader Spool Valve
      By BuffaloD200
      Finally getting around to working on my ark loader.  The previous owner said he thinks the problem is with the spool valve.  
      As I've learned a bit more about hydraulics now, I'd like to get this all sorted out.  
      I noticed the power beyond port is connected to the reservoir return.  Is that right?  
      Anyone see anything blatantly incorrect?



    • ccs002
      D-160 Hydro Pump
      By ccs002
      Looking for a complete hydro pump for a D-160. Tractor is missing everything from the rubber coupler disc back. Also willing to buy a complete tractor for parts, the closer to Harrisonburg VA the better. Thank you. 
    • tractorboy79
      GT14/D series lift cylinder modification
      By tractorboy79
      I was looking around on ebay and noticed that hydraulic actuators from John Deere 312, 317, etc models appear to be Identical to a Gt14 or d series lift cylinder. My question is would a new cylinder from ebay be able to replace one that is on a gt14 or d series?
       
      Images below of cylinders to show similaritys.


    • BuffaloD200
      HELP! D-Series Clutch
      By BuffaloD200
      '74 D-180
       
      My friction disc in gone on my clutch.  I saw the old post about making a new friction disc, so I'm not concerned about that.
      I managed to remove the front clutch plate and double v-belt pulley.  But I can't separate the two.  When I took the assembly off the spiraloc washer popped off on its own.  I HAVE READ THE MANUALS.
      So I should be able to just remove the pulley from the front clutch and continue with step 4.  The v-belt pulley is loose as all hell and flops around like a dead fish.  It seems to be hung up on a ring or bearing race.  
      So my thoughts are grab a BFH or sparky the blue tip wrench.
      Is there an unpublished step 3.5, or some trick?
    • BuffaloD200
      D-Series One Wheel Peel
      By BuffaloD200
      Hey all, 
       
      My '74 D180 has a lot of trouble pushing snow.  Weighted tires, but nothing else at this time.  I've found it gets stuck frequently and only one wheel spins.  Do these tractors not have a limited slip/locker arrangement?  How does everyone manage with the infamous one wheel peel?
×
×
  • Create New...