mattd860 162 #1 Posted January 1, 2012 Is there anyone with a C-195 in the Connecticut area that will let me come look at the tractor? I need to see if my custom hydro foot pedal setup will work on their tractor. Please let me know. Thanks. Share this post Link to post Share on other sites
stevebo-(Moderator) 8,527 #2 Posted January 1, 2012 You are more than welcome to come take a look at mine. Share this post Link to post Share on other sites
Kelly 1,033 #3 Posted January 1, 2012 I'm not close but when I get one from you I will be seeing if it fits my 195 loader tractor, I think it will. Share this post Link to post Share on other sites
SALTYWRIGHT 861 #4 Posted January 1, 2012 I HAVE A GT=14 IF YOU NEED TO SEE IF IT FITS. I AM IN CT. RUSS Share this post Link to post Share on other sites
Kelly 1,033 #5 Posted January 1, 2012 I'm going to take a stab here right or wrong, I think the kit will for the most part work on the hydros 78 and newer, with the wide dash tower, but prior to that the dash tower is much narrower and the rods will probably not fit as is, I'm also wondering if the tractors with the sunstrands in them will have a issue with the over center pivot set up, not sure there will be room for it, again this is just my opinion not having one in my hand yet. Share this post Link to post Share on other sites
refracman 167 #6 Posted January 1, 2012 I have the OE foot control on one of my 195's, so if it takes as much or less room it'll work. Share this post Link to post Share on other sites
Shuboxlover 480 #7 Posted January 1, 2012 I WANT ONE FOR MY 520!!!!!!!!!!!!!! Share this post Link to post Share on other sites
mattd860 162 #8 Posted January 1, 2012 I WANT ONE FOR MY 520!!!!!!!!!!!!!! PM sent - if you want one you got it! Share this post Link to post Share on other sites
