Looking for PTO bearings..

[Stigian 1,234]

Hi Guy's do any of you know a source for PTO bearings, both inner and outer?

Cheers :handgestures-thumbup:

[SousaKerry 503]

the bearings are quite common in the US at least any power transmission supplier should be able to cross reference the numbers stamped in the bearing cases

[Stigian 1,234]

Ta muchly for the fast reply.. Do you happen to know the bearing reference numbers for these bearing?

[kpthorsefan 34]

HELLO IAN, IF ITS THE PTO ON THE ENGINE ? ON MY K301 I REPLACED THEM WITH / INNER BEARING J-2420 / OUTER BEARING 204RR-6, WHICH I GOT FROM A LOCAL BEARING TRADER.... HOPE THIS IS A HELP.

[Stigian 1,234]

Thanks for that Kp, I feel some google-ing coming on later :)

[Anglo Traction 761]

Hi Ian ,

I'm back !. Just seen this Cry for Help and thought I'd let you know that I am prepared to part with a NOS OEM Inner Bearing and a New Aftermarket Outer Bearing for PTO. I bought 2 sets from U.S.

If you've had no joy so far, let me know.

........................................ I will need 2 PTO Oil Seals (#6663) if you or anyone knows of the Aftermarket equivilent (UK) . The old one spins in the Housing!.

P.S. Have we lost the 'Euro Wanted' section ?, and do we Post our Needs and Rejects (Sales) in this Section?.

Regards.

[rmaynard 16,289]

P.S. Have we lost the 'Euro Wanted' section ?, and do we Post our Needs and Rejects (Sales) in this Section?.

Regards.

Let Karl know by posting the problem here: http://www.wheelhors...nd-site-issues/

[Stigian 1,234]

Hi Ian ,

I'm back !. Just seen this Cry for Help and thought I'd let you know that I am prepared to part with a NOS OEM Inner Bearing and a New Aftermarket Outer Bearing for PTO. I bought 2 sets from U.S.

If you've had no joy so far, let me know.

........................................ I will need 2 PTO Oil Seals (#6663) if you or anyone knows of the Aftermarket equivilent (UK) . The old one spins in the Housing!.

P.S. Have we lost the 'Euro Wanted' section ?, and do we Post our Needs and Rejects (Sales) in this Section?.

Regards.

Hi Richard welcome back, I guess you have got your laptop fixed

I will take you up on your kind offer of the PTO bearings. Thank you Sir

Best wait a few days until silly season is out the way the we can sort details out.

I can't help you with the PTO seals I'm afraid, but this being RedSquare I'm sure help is not far away.

[Anglo Traction 761]

Let Karl know by posting the problem here: http://www.wheelhors...nd-site-issues/

Thanks Bob, done that. It has been 'Pulled' and replaced with a new section in the 'Classifieds' in the 'Header Line'

Hi Ian ,

I'm back !. Just seen this Cry for Help and thought I'd let you know that I am prepared to part with a NOS OEM Inner Bearing and a New Aftermarket Outer Bearing for PTO. I bought 2 sets from U.S.

If you've had no joy so far, let me know.

Hi Richard welcome back, I guess you have got your laptop fixed

I will take you up on your kind offer of the PTO bearings. Thank you Sir

Best wait a few days until silly season is out the way the we can sort details out.

I can't help you with the PTO seals I'm afraid, but this being RedSquare I'm sure help is not far away.

Ok Mate , I'm 'Kitted Out' with a new Laptop...it's 'The Dogs ***!'

check this out anyway:-

Equiv Nbrs are:- Outer (Deep Groove)- P204RR6 or Z95042RST (Rubber Shields) B 0.75"x O/D 1.78"x 0.6".

Inner-(narrow drawn open Needle Roller) BA2420ZOH (also with prefix J or SCE)1.5"x 1.875"x 0.250".

Available from- Simply Bearings.co.uk. or others... total cost is about UK£20.00 incl Tax n Shipping.

[Stigian 1,234]

Thanks very much for that Richard your a dab hand with the Google-fu

A couple of these turned up from the simply bearings boys today

[meadowfield 2,733]

good stuff - I take it you got your sky broadband back and running.... :hide:

[Anglo Traction 761]

Thanks very much for that Richard your a dab hand with the Google-fu

A couple of these turned up from the simply bearings boys today

Hi Ian, I was worried about your absence. I had the Bearings on standby, but didn't want to disturb you.

Glad to see you back posting after the festive period.......I just picked up my PTO Oil Seals (and Choke Cable).

Regards

[Stigian 1,234]

good stuff - I take it you got your sky broadband back and running....

Lol, it was until last night Mark.. It's only just usable at the mo!!

[Stigian 1,234]

Thanks very much for that Richard your a dab hand with the Google-fu

A couple of these turned up from the simply bearings boys today

Hi Ian, I was worried about your absence. I had the Bearings on standby, but didn't want to disturb you.

Glad to see you back posting after the festive period.......I just picked up my PTO Oil Seals (and Choke Cable).

Regards

Thanks for that bearing link Richard, very fast delivery as well!

Glad you found your oil seals and cable.