Jeremy Watson 22 #1 Posted September 30, 2011 I'll start by saying I hope I made a good decision...I traded a single stage walk behind Ariens snow blower model 722 for this wheel horse single stage snow blower. So here's my question...will this mount directly to a 93 520H without any modification? Second...is it possible to put a tall chute on this blower? Thank you in advance! The snow blower looks like it was barely used. Thought i'd also show you another find I made this week...its a Toro snow blower that I got for free while tearing down a garden shed. Thank You Share this post Link to post Share on other sites
Jumo 0 #2 Posted September 30, 2011 I have the same blower hooked up to my 520. For me there's no comparison to a walk behind. I had a 8HP 32" walk behind and it took me 45min to 1 hr to clear my drive. On 520 its less than a 1/2 hour for the same amount of snow. It hooked right up to my 1988 520H and I think you should be ok too. Share this post Link to post Share on other sites
TT-(Moderator) 1,129 #3 Posted September 30, 2011 Second...is it possible to put a tall chute on this blower? Piece of cake : http://www.wheelhorseforum.com/index.php?showtopic=7685 Share this post Link to post Share on other sites