pfrederi 17,193 #1 Posted April 25, 2011 Based on the helpful info here I had decided to use a C-81 I picked up at the show last year to be my moldboard plow tractor. She was pretty rusty and wasn't running. Got her running and did some repainting and mounted the clevis hitch. Several members suggested that additional front end weight might be needed. Didn't really have anything to use until I thought about the KT17 NOS short block I bought 4 years ago as a back up for my Series 1 former JD motor I had put in my C175. The transplant still runs albeit using some oil so the short block had just been on the shelf. Decided that would make additional front end weight so conversion from a C81 to a C175 was underway. The only real problem was the lack of available C175 mufflers. I had a 417 muffler but it wouldn't quite clear the hood and required some different engine shrouds.. I modified the hood mounting hinges and added a heat shield. She runs like a champ. Haven't done any plowing yet as the rain never seems to stop, Still am waiting on a PTO rod and when the weather improves need to paint the fender pan. She is currently wearing the hood borrowed from my C175 I need a Black Hood hood ... I will be a the Arendtsville show, anyone got one the want to sell??? (shipping on hoods is ridiculous!! Share this post Link to post Share on other sites
corn53 4 #2 Posted April 27, 2011 :thumbs: Nice job on the repower!!!! Share this post Link to post Share on other sites
Kelly 1,028 #3 Posted April 27, 2011 Make you pictures bigger, it's hard for a old man to see them, but sounds like it went good. Share this post Link to post Share on other sites
corn53 4 #4 Posted April 27, 2011 Kelly did u click on em?? They do get a lil bigger. Share this post Link to post Share on other sites