Any pictures of a D-180 clutch?

[4xfourfun 30]

Hey guys,

I think my D-180 manual PTO clutch is missing some type of bracket at the engine. The clutch appears to move back and forth way too much.

Does anyone on here have a picture of a clutch assembly on a tractor? I'm going to try and get my camera back in the next day or so but thought I would see if anyone on here could help out so I could start hunting for the parts. I hope to be tilling next week.

Thanks!

-Ben

[wh79d160 52]

I'll get you some. Be back in a couple of hours.

[wh79d160 52]

. Hopfully these will help. Let me know if you need others, This is a D-200. My D180 is in my other barn & the light isn't very good but this should be about the same.

[4xfourfun 30]

Sweet, thanks!

I already see a couple issues.

First, is that a pin in the bottom of the clutch and not a bolt?

Second, my clutch is so close to the exhaust it touches it at times. Maybe the clutch linkage is hooked up wrong.

I'll get a look at it in the morning and get some pics posted so you can tell me what you think.

Thanks!

-Ben

[Trouty56 565]

That pin is attached to the block. Try to zoom your browser on this image. The pin looks like it is pressed into a hole at about 7 o'clock and bends at a 90

[4xfourfun 30]

Now I see.....thats my problem!

I bet those pins are NLA too.

Any idea where I might start looking?

Thanks for all the help guys!

-Ben

[Trouty56 565]

Ben...you're probably gonna have to get creative. At least you know what you need to do. Good luck and post results. :thumbs:

[hobie 0]

Great pics! And Beautiful tractors!