keg 0 #1 Posted March 25, 2011 does any one know the part number for my 93 model 314-8 drive belt? im at work and wuz gonna look it up on toro parts finder but left my info at home thanks guys Share this post Link to post Share on other sites
dgjks6 6 #2 Posted March 25, 2011 7473 just bought one at the dealer for $33. It was alot wider adn thicker than the aftermarket one I replaced. Share this post Link to post Share on other sites
keg 0 #3 Posted March 25, 2011 thanks amillion im takin it to the huntin camp this weekend to do sum tilling. but i noticed the other day she wuz slipping a little wen i wuz tilling my garden Share this post Link to post Share on other sites
can whlvr 991 #4 Posted March 25, 2011 so many discusions here on belts,i like the oem drive belt and its not terribly over priced concidering it lasts 4 years Share this post Link to post Share on other sites
JC 1965 1,528 #5 Posted March 26, 2011 so many discusions here on belts,i like the oem drive belt and its not terribly over priced concidering it lasts 4 years I second that, I always buy OEM belts, better quality, just my 2 cents worth!! :thumbs: Share this post Link to post Share on other sites
JoeMonag 1 #6 Posted March 26, 2011 I learned the hard way years ago about the drive belt, on my '73 8HP 4 speed. Bought a non-Wheel Horse belt that fit, but lasted only a litttle while. Now have a 310-8 and a 416-8, both take the same drive belt, I keep a spare 7473 on hand. If you make sure the clutch spring is tight, and the idler pully spins freely. along with releasing the clutch gently, the belt should last a life time. It also helps to lubricate the the clutch and idler pulley linkage, to insure the it moves freely. Joe in Norton Share this post Link to post Share on other sites