todd1 0 #1 Posted February 6, 2011 Does anybody know if a magnum 18 will fit in a 310-8? And what mods will need to be done. Thanks, Todd Share this post Link to post Share on other sites
Raider12puller 1 #2 Posted February 6, 2011 The holes will be in the frame already for the mounting plate. Just have to make or buy the engine mounting plate for a 418. My local wheelhorse dealer could still get them. So yes it will fit. Share this post Link to post Share on other sites
Sparky-(Admin) 19,673 #3 Posted February 6, 2011 I'm thinkin if your 310-8 has/had a Magnum 10 you'll wont have to mess with the ignition and wiring much. If you have the "K" series 10hp you'll have a bit more work to do. Mike......... Share this post Link to post Share on other sites
Jesse James 0 #4 Posted February 6, 2011 The motor plate from a 417 or a 418 will fit. You may need to get a different PTO bushing, they may be different sizes. Share this post Link to post Share on other sites
todd1 0 #5 Posted February 7, 2011 Thanks for the replies guys. I'm a mechanic at a golf course and I'm always looking for old K series engines. Well friday I got a call from our ez-go guy and he has a ryan ga 30 aerator with a m18. This thing sounds great no smoke or knocks for $75.00. I'm betting it doesn't have more than 400 hours on it. Can't wait to get to work tomorrow. Todd Share this post Link to post Share on other sites
can whlvr 991 #6 Posted February 7, 2011 WOW,75 bucks,thats allmost free,for an 18hp Share this post Link to post Share on other sites
Olratlr 25 #7 Posted February 8, 2011 Can you ship me one? :thumbs: Share this post Link to post Share on other sites
