B-8074 19 #1 Posted January 23, 2011 I did a few searches without the results I was looking for. Has anyone made anything to keep snow or dirt from spilling out the sides of the plow? I plow a street that has cars on one side and sidewalks on the other. The only place to put the snow is at the end of the street and it takes forever when half the snow falls out the side. :banghead: Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #2 Posted January 23, 2011 Here's one: http://www.wheelhorseforum.com/index.php?showtopic=7195 Share this post Link to post Share on other sites
3970010 0 #3 Posted February 10, 2011 thats a very nice mod! but i think it would be better if it was bolt on so it could get into narrower places and to angle the plow to do a better job :thumbs: Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #4 Posted February 10, 2011 If you go back and read it closely, they do come off. The tack welds you see in the pictures were temporary. Share this post Link to post Share on other sites
.5racer 14 #5 Posted February 11, 2011 Yes they are removable .. Thanks for the recomendation TT . Here are a few pics . Square in square work good , but have found out round in square works just as good if not better. Less chance of rusting in. Hope this helps. Share this post Link to post Share on other sites