Ark Loader Restore

[MalMac 1,328]

I have been looking for good pics. of an Ark loader around a 1978 version. I have been looking for factory fresh pics. All pics I have found so far are ones that the loader has been used or modified somewhat. I am trying to put it back to orginal factory with correct decals, etc. Anybody have any or know where to look?

[partsman6656 0]

It somewhat depends on which loader model you have. The decals on the

40" C-Series and the 48" D-Series are a bit different.

Mine is a '80 Model, 40" C-Series and it had only two decals on it from WH.

The yellow/black CAUTION on the left upright is Ark # 20037. The only other

decal was on the front boom crossmember and it is WH # 102831.

I have seen lots of variations on restored models--everyone to his liking.

You should be able to get a copy of a manual from Toro or one of the

clubs sites.

Hope this helps,

Randolph

[fireman 1,021]

Get a hold of RickV. His loaders are original and mint

[Brrly1 1,146]

There are 500 series, which are for the C-series and the GT14's.The 550 series for the D-series plus the D250's. Hope that helps. See Ya, Bye Burly

:thumbs:

[dgoyette 12]

What about Stevebo's post's of his D. As I recall there were some fine pictures in that thread. Just a thought

[C-Series14 15]

Pic of my 1979 WH FEL in the tractor gallery on my 1979 C-161 8-Speed....I don't have the upright decal but the WHEEL HORSE decal is correct.

[MalMac 1,328]

The Loader is on a C series. It's got the Wheel Horse across the front cross brace and the yellow and black on the upright. I was just wondering if they had anything else on them. I wonder if I can get the yellow and black reproduced?

[Brrly1 1,146]

How about some pictures of what you have? Just out of curiousity? See Ya, Bye

Burly

:thumbs: