jtmoyer 1 #1 Posted January 12, 2011 just broke the motion control lever at the safety switch on the 520. i was out blowing the 4+ inches of new power we got and crack. managed to get it in to reverse .00001 mph to craw back to the garage from 2 houses away. so any one got one they want to part with or should i just jb weld it? photos when i get some light Share this post Link to post Share on other sites
KB9LOR 4 #2 Posted January 12, 2011 Is it weldable? If so give me a call, I can weld it for you. I can even come by and pick it up if it can be removed. Share this post Link to post Share on other sites
stevasaurus 22,273 #3 Posted January 12, 2011 Can you imagine if Congress worked as well for "all the people" as the people on this site do. What a world it would be. :banghead: Share this post Link to post Share on other sites
rickv1957 70 #4 Posted January 12, 2011 :banghead: :thumbs: Share this post Link to post Share on other sites
buckeye 2 #5 Posted January 12, 2011 Well put Steve, Share this post Link to post Share on other sites
d180man 5 #6 Posted January 13, 2011 Can you imagine if Congress worked as well for "all the people" as the people on this site do. What a world it would be. :thumbs: Share this post Link to post Share on other sites
Shuboxlover 474 #7 Posted January 13, 2011 If it's the years of 520's that have the motion control lever between your legs....I have one. If you are interested, PM me. :banghead: Share this post Link to post Share on other sites
jtmoyer 1 #8 Posted January 13, 2011 it a 91 with the controls on the dash. i think i am just going to jb weld it. now i just have to get there to do it. with the snow cab and blower on things tend to get in the way. Share this post Link to post Share on other sites
Shuboxlover 474 #9 Posted January 13, 2011 That sounds like a job.....good luck :banghead: Share this post Link to post Share on other sites