here's a first-- al least for me

[jtmoyer 1]

just broke the motion control lever at the safety switch on the 520.

i was out blowing the 4+ inches of new power we got and crack. managed to get it in to reverse .00001 mph to craw back to the garage from 2 houses away.

so any one got one they want to part with or should i just jb weld it?

photos when i get some light

[KB9LOR 4]

Is it weldable? If so give me a call, I can weld it for you. I can even come by and pick it up if it can be removed.

[stevasaurus 22,234]

Can you imagine if Congress worked as well for "all the people" as the people on this site do. What a world it would be. :banghead:

[rickv1957 70]

:banghead: :thumbs:

[buckeye 2]

Well put Steve,

[d180man 5]

Can you imagine if Congress worked as well for "all the people" as the people on this site do. What a world it would be.

:thumbs:

[Shuboxlover 474]

If it's the years of 520's that have the motion control lever between your legs....I have one.

If you are interested, PM me. :banghead:

[jtmoyer 1]

it a 91 with the controls on the dash. i think i am just going to jb weld it. now i just have to get there to do it. with the snow cab and blower on things tend to get in the way.

[Shuboxlover 474]

That sounds like a job.....good luck :banghead: