dwayneGT 6 #1 Posted November 10, 2010 :thumbs: I'm looking for an engine manu. for a 11 hp briggs & stratton for my GT 1142. I know for sure they ate the wires for the magneto/coil and I get no response when I turn the key. If I jump the solenoid the motor turns over. Any help would be greatly appreciated! Thanks in advance, Dwayne Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #2 Posted November 10, 2010 :thumbs: This should help: http://www.mywheelhorse.com/graphics/file/...OM_810321R1.pdf Wiring schematic is on page 30. Share this post Link to post Share on other sites
Sparky-(Admin) 19,652 #3 Posted November 10, 2010 TT only helped ya with half yer problem. This should take of of the rest of the problem...... ! Mike........ Share this post Link to post Share on other sites
dwayneGT 6 #4 Posted November 10, 2010 Thanks TT and Mike Share this post Link to post Share on other sites
dwayneGT 6 #5 Posted November 10, 2010 There was so much fiberglass insulaton stuffed in around the flywheel the motor wouldn't turn over! Share this post Link to post Share on other sites
Duff 206 #6 Posted November 10, 2010 There was so much fiberglass insulaton stuffed in around the flywheel the motor wouldn't turn over! Yeah, and it only gets worse as cold weather settles in and the beady-eyed little bastids hunt for new homes.... Duff :wh: Share this post Link to post Share on other sites