nitnoc420 0 #1 Posted October 26, 2010 i bought this 516 awhile back and just got around to it. drove it around for awhile testing it out and the loader and i noticed it was having trouble moving around forward or reverse it just dont want to go. could it be the belt? or a pulley i really dont think its the trans or pump but i dont know could be anything......any idea's would be great thanks tim Share this post Link to post Share on other sites
wh79d160 52 #2 Posted October 26, 2010 Tim, 1st . Don't know much about 500 series. I guess we need to know if its manual (8-speed) or hydro. check the belts & pulleys to see if they are all right & go from there. :thumbs: Share this post Link to post Share on other sites
jtmoyer 1 #3 Posted October 26, 2010 first i would check the fluid level. then i would move on to the control levers and make sure it is moving all the way and it is make sure it is moving all the way under the seat. Share this post Link to post Share on other sites
wallfish 15,985 #4 Posted October 26, 2010 any idea's would be great Sheared key for a rear hub :thumbs: Share this post Link to post Share on other sites