Jump to content
Vinylguy

REPRODUCTION DECALS

Recommended Posts

Thank You All For Your Continued Support.

After 4 Years And Countless Hours Of Design Time I

Have Recreated Many Of The Most Common

Vintage Wheel Horse Decals Needed To Restore

These Great American Tractors. If You Do Not

Find Your Decals On My Website Please Contact Me

Or Leave A Post With Your Request. I Will try To Get

Them Developed When Time Allows.

I Am Now Using A High Quality Digital Print Vinyl

With Air Escape Technology That Is Much More User Friendly.

It Is A Bit More Expensive But Better Quality And Easier To Install

With Less Chance For Bubbles Or Wrinkles.

You Can Still Use The Windex Wet Application Technique That Is

Popular With Many Of Our Members.

All Decals Are Made Up As Orders Come In To Assure

You Have Brand New Fresh Decals With A Long Shelf Life.

If You Find An OEM Decal In Most Cases They Have Been On A Shelf For

Many Years And The Adhesive Has Most Likely Eaten Into The Liner

Making It Difficult If Not Impossible To Use.

We Are Making Every Effort To Improve Customer Service And

Delivery Time Though Most Of You Know I Run A Full Time Graphics Shop

And It Has To Come First.

With That Said I Can Tell You That Most Orders Usually Arrive At Your Address In About 7 To 10 Days. Some Times It Can Take Longer.

Thanks Again

  • Like 9

Share this post


Link to post
Share on other sites
 

Terry I have a w/h tractor i need decals for. It is not the normal w/h here are a few pics. Just need hood decals maybe you have something already made up. Not much room on back for anything to big. Let me know if you have any ideas.

thanks Karl stohry phone # 1-765-525-7105 e-mail ksstohry@tds.net

post-4384-0-37594100-1346892760.jpg

post-4384-0-10598000-1346892779.jpg

post-4384-0-32682300-1346892818.jpg

post-4384-0-01434900-1346892869.jpg

  • Like 6
  • Thanks 1

Share this post


Link to post
Share on other sites
 
 

Try www.redoyourhorse.com

  • Like 1

Share this post


Link to post
Share on other sites
 
 
 

I'm looking for a "caution" sticker that is on the seat bracket of a 1970 GT-14. I could not find one on your site and that is the only sticker I need. It is in this picture, but I only need the caution sticker.   http://restorationdecals.co.uk/gt14.htm

Here is a link to the push valve caution decal you are looking for.

http://www.redoyourhorse.com/push-valve-decals/

  • Like 1

Share this post


Link to post
Share on other sites
 

Ready to do the Ark loader decals Terry? 

Share this post


Link to post
Share on other sites
 

...Hello Vinylguy... 

 

     I have just about completed restoration on my '64.5 1045 Wheelhorse and am in need of all decals. Please let me know if decals are available and etc...

 

 

                                     Bill Moore

Share this post


Link to post
Share on other sites
 

Bill Moore

Go to the vendor section where Terry has a link to his store for a listing of his decals. Hope this helps.

Sent from my tractor seat using Tapatalk 2

Share this post


Link to post
Share on other sites
 

Here is a link Bill

Also use the search box at the top of the website to search for other decals you may need.

Make sure to register before you purchase so I can add your account to the support group

which will give you the discount.

 

http://www.redoyourhorse.com/856-1045-1046-1055-1056-decal-kit/

Edited by VINYLGUY

Share this post


Link to post
Share on other sites
 

Do you have decals made for the Ark Loader?  The 550 and the Caution label for the loader.

 

Thanks

 

Edwroy

  • Like 1

Share this post


Link to post
Share on other sites
 

Thank You All For Your Continued Support.

After 4 Years And Countless Hours Of Design Time I

Have Recreated Many Of The Most Common

Vintage Wheel Horse Decals Needed To Restore

These Great American Tractors. If You Do Not

Find Your Decals On My Website Please Contact Me

Or Leave A Post With Your Request. I Will try To Get

Them Developed When Time Allows.

 

I Am Now Using A High Quality Digital Print Vinyl

With Air Escape Technology That Is Much More User Friendly.

It Is A Bit More Expensive But Better Quality And Easier To Install

With Less Chance For Bubbles Or Wrinkles.

 

You Can Still Use The Windex Wet Application Technique That Is

Popular With Many Of Our Members.

 

All Decals Are Made Up As Orders Come In To Assure

You Have Brand New Fresh Decals With A Long Shelf Life.

If You Find An OEM Decal In Most Cases They Have Been On A Shelf For

Many Years And The Adhesive Has Most Likely Eaten Into The Liner

Making It Difficult If Not Impossible To Use.

 

We Are Making Every Effort To Improve Customer Service And

Delivery Time Though Most Of You Know I Run A Full Time Graphics Shop

And It Has To Come First.

 

With That Said I Can Tell You That Most Orders Usually Arrive At Your Address In About 7 To 10 Days. Some Times It Can Take Longer.

 

Thanks Again

hi do you do a full set of decals for a raider 10 1975 if so what is the price regards bob fox

Share this post


Link to post
Share on other sites
 
 

Thanks Bob:thanks:

 

 

hi do you do a full set of decals for a raider 10 1975 if so what is the price regards bob fox

Do you have the model number?
 

Share this post


Link to post
Share on other sites
 

Hello Terry, I would like to know if you can make the WHEEL HORSE letters on the front of the round hood tractors? They are about 1/8th of an inch wide by about 1 1/4 tall, just a guess but you probably have access to a round hood for reference. Also the KOHLER letters on 7 and 8 hp Kohler engines. Both of these requests are for the raised letters on both parts. Thanks let me know what ya think about making these up. I am sure others would buy them as well. It is some what hard to hand paint these letters. Thank you! Just ordered 2 1955 hood decals and 2 steering wheel insert decals. Keith

Share this post


Link to post
Share on other sites
 

Keith 

 I do not have access to a hood with the extruded letters. Also it is difficult position  vinyl decals on extruded letters and have them look right. Have you tried using a paint stick.

 

  • Like 1

Share this post


Link to post
Share on other sites
 

I need decals for the 5-1220 48" side discharge deck and decals for 1997 wheel horse 314 hydro and the decal for the 48" snow blade. Prices on all. Ones I need first is for the deck.

Share this post


Link to post
Share on other sites
 

Did you do a search on Terry's web site for what you need? Many times a search will produce items that are not yet categorized.

Share this post


Link to post
Share on other sites
 

Terry...a question....everyone will hate me.....But.....i am planning on getting an 867,,,,,i have seen the decals....Hateum !!!!!

BUT !!!!!!    i like the 857 decals.........can you make me a set and change the 857  to 867..?? ??????????

 

I know......Shoot me...    But....thats what i like.......this will be my winter project

 

Thanks Terry........

 

                    Howard 857 Horse...........You locally owned and operated Mash Pole Guy....:banana-wrench::banana-rock::banana-dreads:

Edited by 857 horse
  • Like 4

Share this post


Link to post
Share on other sites
 
26 minutes ago, 857 horse said:

.i am planning getting an 867,

:wwp:

  • Like 1

Share this post


Link to post
Share on other sites
 

Richard.....one of those Bananas is You...lololool   One is Road Apples...and behind door #3 is Elcamino.....

 

It will be a 400 mile 1 way road trip......up state New York......Road Apples will be my side Kick///////1 day affair !!!!!!

  There will be loading pics......road pics....lunch pics........dropping Road Apples off Pics.....

 

Oh yeah,,,,,,Gonna do a play by play.....

Edited by 857 horse
and dont forget your mash pole sign !!!!
  • Like 4

Share this post


Link to post
Share on other sites
 

:roll:   Can anyone translate...

what Howard just said? :ychain:

  • Like 3

Share this post


Link to post
Share on other sites
 

I don't care what decals you put on it Howard. Just make it like you want it.  :thumbs:

Edited by 19richie66
  • Like 3

Share this post


Link to post
Share on other sites
 

Richie,,,,thanks for the thoughts !!!!!   I was just talking about a road trip....taking (Jay) Road Apples along and

 

Craig just caught me on a rant.!!!!! I've been know to do that......lolollool

 

I want to document this heist like Craig does...." In my rear view"   Husssstlin one out of State back to the U.S of VA lolololol

 

and i knw if i dont do pics,,,,,Im busted and caught in the act.,,,So.....4 weeks from now......an 867 will be tied up in the back of the old truck.....

Edited by 857 horse

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×