mattd860 162 #1 Posted August 8, 2010 I am going to go look at a tiller someone is selling for my c-81. Can someone here post a picture of a complete tiller with pulley and any attachments needed to mount and operate the tiller to my machine? I have the rear axle mount used to fasten the tiller or a plow to the machine but there must be other equipment needed to raise and lower the tiller as well as turn the blades. I want to make sure the tiller(s) that I'm going to look at are complete and ready to use. Share this post Link to post Share on other sites
C-Series14 15 #2 Posted August 8, 2010 I did some searching and found this post...(as well as several others before this one) http://www.wheelhorseforum.com/index.php?showtopic=20307 If you look at the third reply down, TT has listed the IPL for the tiller. Look at the second diagram, it shows the lift linkage you need that goes under the seat... You also need the mid mount idler pullies to operate the tiller. Oh, and a 139" belt... Share this post Link to post Share on other sites