B-8074 19 #1 Posted July 27, 2010 I found a long frame plow (model# 76-42BC01) to use on my 1969 Charger 12 (model# 1-7241) and when I mounted it to the tractor and used the lift arm the bracket on the plow frame for the blades angle control arm hits the foot rest monting bar. I thought all long frame plows were interchangeable? This is a pic of the plow. Share this post Link to post Share on other sites
C-Series14 15 #2 Posted July 27, 2010 Your axle mounting bracket is mounted too far back. Yours is different than mine but I believe your angle pieces should be on the front of the axle OR below the axle (like mine does) which would move the blade forward some. Others will chime in if I am wrong.... Share this post Link to post Share on other sites
B-8074 19 #3 Posted July 27, 2010 I feel stupid now!! I tried every thing but put the brackets in front of the axle. Oh well live and learn :D Share this post Link to post Share on other sites
C-Series14 15 #4 Posted July 27, 2010 Give it a try, it might make the difference. Mine is a little different, it mounts to the bottom. Share this post Link to post Share on other sites
B-8074 19 #5 Posted July 28, 2010 Well it worked. Thank you very much. Share this post Link to post Share on other sites
wheel horse man 56 #6 Posted July 28, 2010 heres the right bracket your suppost to have Share this post Link to post Share on other sites