just rebuilt my trailers hubs

[truckin88 104]

I got my 2003, 6.5x10 utility trailer about a month ago, and even though the bearings appeared ok, and the grease was clean, I busted the rear grease seals on the hub after installing some bearing buddys. The tires still tracked ok and no weird sounds.

I figured I'd replace the bearings and seals. When I removed the bearings and cleaned them, the bearings looked ok no pitting or scarring, one of the races had some light scarring. So I replaced all bearings and races with moog parts from napa, same for the seal. I used Mystic hi temp grease and put the bearing buddys back on. It was a cool project and learning experience, thanks to the internet it went rather smoothy.

This is a good how to video:

http://www.sailingtexas.com/Movies/Trailer...erbearings.html