jtmoyer 1 #1 Posted June 18, 2010 can anyone give me a good photo of how the pump attaches to the d. thanks, Share this post Link to post Share on other sites
rickv1957 70 #2 Posted June 19, 2010 I will get you a couple of photos Sat AM,Rick Share this post Link to post Share on other sites
rickv1957 70 #3 Posted June 20, 2010 Oops,busy day,will get photos in the AM, Rick Share this post Link to post Share on other sites
Brrly1 1,146 #4 Posted June 20, 2010 Rick, No excuses!! See Ya, Bye Burly :D Share this post Link to post Share on other sites
jtmoyer 1 #5 Posted June 20, 2010 i had a full day to, i spent all day hitting the refresh button :thumbs: Share this post Link to post Share on other sites
Don1977 604 #6 Posted June 20, 2010 Try this link: http://www.wheelhorseforum.com/index.php?...=14589&hl=d-200 It will give you some idea. Share this post Link to post Share on other sites
rickv1957 70 #7 Posted June 20, 2010 I have seen several ways to mount pump,Dons link shows my D200 with a shaft driven pump from PTO ,these pictures are from my D180,Rick Share this post Link to post Share on other sites
jtmoyer 1 #8 Posted June 21, 2010 i have a different set up. the po mounted the pump under the "bumper" and it tends to run in to things. it looks like i could mount it directly behind the bumper but it is not lining up right. guess i will have to play with it some more. thanks for the photos. Share this post Link to post Share on other sites
rickv1957 70 #9 Posted June 21, 2010 I think the factory type setup is shown on my D180,Rick Share this post Link to post Share on other sites