FLtractor 249 #1 Posted 5 hours ago Afternoon, I have attempted to step on pedal near pulley.. use clutch .. slip belt off by hand.. no luck. What is the best way to removal this belt and then replace ? Share this post Link to post Share on other sites
ri702bill 13,313 #2 Posted 5 hours ago Remove the idler pulley and its bent tab bracket. That should give you the slack needed to peel it of one of the pulleys - works on my 702 & 854... 1 Share this post Link to post Share on other sites
peter lena 10,106 #3 Posted 2 hours ago @FLtractor that belt fraying , reflects back on related , bearings , noisy / dry rough , incremental bearing stoppage , leads to belt bounce , fraying , everything looks bone dry . ever lubricate related linkage ? pete Share this post Link to post Share on other sites
FLtractor 249 #4 Posted 2 hours ago 2 hours ago, ri702bill said: Remove the idler pulley and its bent tab bracket. That should give you the slack needed to peel it of one of the pulleys - works on my 702 & 854... Thanks. Will give it a go Share this post Link to post Share on other sites
FLtractor 249 #5 Posted 2 hours ago 45 minutes ago, peter lena said: @FLtractor that belt fraying , reflects back on related , bearings , noisy / dry rough , incremental bearing stoppage , leads to belt bounce , fraying , everything looks bone dry . ever lubricate related linkage ? pete Have not lubricated since owned no.. Going to replace belt with new proper ribbed belt once I find out which model # I need from local NAPA. Share this post Link to post Share on other sites