oliver2-44 11,771 #1 Posted 16 hours ago (edited) I have a 1969 Raider model that has had butchering on the hoodstand. Hoodstand part number 7881 I also have a 1973 8-8 model 1-0370 8 sort of a parts tractor. Hoodstand part number 102795 The tractors are not stored in the same place, so it hard to compare the hoodstands from pictures, but they seem similar. I know Wheel Horse change part numbers at one point in time to get around some sort of federal price regulations, I think in the Nixon years. Can anyone, tell me if these Hoodstands are the same? Maybe @gwest_ca This is the 1969 Raider 12 In has another hole in the rear, besides the one pictures, and weld scab repair This is the 1973 8-8 Edited 16 hours ago by oliver2-44 1 Share this post Link to post Share on other sites
ebinmaine 80,893 #2 Posted 6 hours ago We don't have either of those specific models here but I'm about 95% sure that'll bolt right on. My only question would be the height. I >think< they're the same. All the mounting bolt holes should be identical. 2 Share this post Link to post Share on other sites
sqrlgtr 4,084 #3 Posted 2 hours ago I'm with Eric I believe they will swap right out. Maybe someone will come along that has done/tried the swap and will tell you for sure. Share this post Link to post Share on other sites
Lee1977 7,801 #4 Posted 39 minutes ago Could not find the assemble drawings for the 69 Raider 12 1-6231. I think they are the same. My 1971 had a pipe at the back for the fender hinge. All the others I found as a flat bar bent down on the ends for the hinge, either one will work. The 73 8-8 has the bar if the drawings are right. Share this post Link to post Share on other sites
