Pictures of mechanical stuff needed!!

[Retired Wrencher 7,019]

This is the only thing I have. Maybe my last? It is currently down to the frame.

[Sparky-(Admin) 26,551]

3 hours ago, Retired Wrencher said:

Was this Brads engine?

No, was an 8 that came on a C-81 I picked up in the spring. 

[wallfish 20,698]

On 10/25/2026 at 6:16 PM, squonk said:

 

 

Hey Mike, you really need to start putting some oil in your engines! LOL

[squonk 48,241]

19 minutes ago, wallfish said:

 

 

Hey Mike, you really need to start putting some oil in your engines! LOL

Only one of them was mine!

[Retired Wrencher 7,019]

On 10/25/2026 at 6:16 PM, squonk said:

Wow Mike that nice collection of busted pistons.

 

Edited October 28 by Retired Wrencher

[kpinnc 19,015]

[wallfish 20,698]

 

 

Edited Friday at 12:39 AM by wallfish

[Retired Wrencher 7,019]

10 hours ago, wallfish said:

 

 

John, that’s making good use of old scrap iron. Did you ever weigh one to see how much it weighs? Good job buddy?

[wallfish 20,698]

12 hours ago, Retired Wrencher said:

Did you ever weigh one to see how much it weighs

Nope. I just need to know they're heavier than before

[ML3 2,537]

4hp K91 that I got from @Buckeyes. Actually its the original engine from my Suburban diesel. 

[Retired Wrencher 7,019]

19 hours ago, ML3 said:

4hp K91 that I got from @Buckeyes. Actually its the original engine from my Suburban diesel. 

ML3: You just don’t see many K91,s.Or least I don’t. Nice little engines.

[ML3 2,537]

10 hours ago, Retired Wrencher said:

ML3: You just don’t see many K91,s.Or least I don’t. Nice little engines.

Told that it runs. I installed the Chinese carb for now to get it running. Need to find a recoil starter. 

[Retired Wrencher 7,019]

13 hours ago, ML3 said:

Told that it runs. I installed the Chinese carb for now to get it running. Need to find a recoil starter. 

Try call Brian @570 492 9706. He just bought out a dealer ship that was going out of business. Look up the part number in the manual section for that engine and get the part number that’ll help him a lot. He’s kind of a busy guy. But with that number it’ll we’ll save him  time. Have a good day.

Edited Monday at 10:25 AM by Retired Wrencher

[sqrlgtr 4,126]

4 hours ago, Retired Wrencher said:

Try call Brian @570 492 9706. He just bought out a dealer ship that was going out of business. Look up the part number in the manual section for that engine and get the part number that’ll help him a lot. He’s kind of a busy guy. But with that number it’ll we’ll save him  time. Have a good day.

 He has always come through and helped me out.

[ML3 2,537]

2 hours ago, sqrlgtr said:

 He has always come through and helped me out.

I buy from Brian regularly. 

[Retired Wrencher 7,019]

19 hours ago, sqrlgtr said:

 He has always come through and helped me out.

He is a hard working man with two jobs. I still can’t believe he had the original key in a bag for the B 60 tractor. I guess I can say it was kinda lucky getting that.

[Sparky-(Admin) 26,551]

@ebinmaine

  Couple pics from tonight (yes I posted these elsewhere on the forum) 

 

 

 

 

[ebinmaine 80,999]

@Sparky

 

For those inside weights.. did you have to trim the inner diameter to get over the hubs?

[Sparky-(Admin) 26,551]

20 minutes ago, ebinmaine said:

@Sparky

 

For those inside weights.. did you have to trim the inner diameter to get over the hubs?

 Nope! The hole is plenty big, plus the weights have a notch for the valve stem. PERFECT! 

 

[sqrlgtr 4,126]

1 hour ago, Sparky said:

1 hour ago, ebinmaine said:

@Sparky

 

For those inside weights.. did you have to trim the inner diameter to get over the hubs?

 Nope! The hole is plenty big, plus the weights have a notch for the valve stem. PERFECT! 

 

What brand are those weights? If it was already mentioned I missed it .

[ebinmaine 80,999]

1 minute ago, sqrlgtr said:

What brand are those weights? If it was already mentioned I missed it .

 

Not sure what his are ... we have a couple sets of IHC Cub Cadet weights that look like that.  They fit 12" fronts on bigger tractors too.  And stackable.  

 

 

[sqrlgtr 4,126]

Just now, ebinmaine said:

 

Not sure what his are ... we have a couple sets of IHC Cub Cadet weights that look like that.  They fit 12" fronts on bigger tractors too.  And stackable.  

 

 

Yeah I was thinking they look like 12" front weights off small Farmall's but was wanting to make sure. Would like to add a set on the inside rears on my C-160.

[Sparky-(Admin) 26,551]

45 minutes ago, sqrlgtr said:

What brand are those weights? If it was already mentioned I missed it .

 International Cub Cadet, they weigh in at about 25#’s each

[Bar Nuthin 3,388]