Retired Wrencher 6,954 #1 Posted 7 hours ago Hi I am looking for info on b-60 interlocking system. If anybody has this model with experience do you really need those interlocking switches? I’ve had this for a couple months, but I never really took a look at it to see if the switches are actually there. It’s pretty dirty so I clean this over the winter time.There is no engine on it know. The tranny has blown out seals. So that will be first. then disassemble the rest. Hang frame a clean every inch. That way I can see what is there. I found a switch for it but no key. Thanks for any help. Share this post Link to post Share on other sites
Racinbob 13,119 #2 Posted 7 hours ago You didn't mention what year but they are likely the same. It couldn't get much more basic other than an older model with nothing. Here's the wiring for a 76 B. 1 1 Share this post Link to post Share on other sites
Sparky-(Admin) 26,262 #3 Posted 1 hour ago Never seen a real B-60 in person. So you have to press the clutch pedal while pull starting it? Interesting, hopefully you have good balance and she fires up in a pull or two. Share this post Link to post Share on other sites
squonk 47,989 #4 Posted 1 hour ago 7 minutes ago, Sparky said: Never seen a real B-60 in person. So you have to press the clutch pedal while pull starting it? Interesting, hopefully you have good balance and she fires up in a pull or two. Imagine yanking it without pushing in the clutch and it's in 3rd with a wide open throttle and it fires up! That would be a hoot! Share this post Link to post Share on other sites
rjg854 13,330 #5 Posted 1 hour ago 33 minutes ago, squonk said: Imagine yanking it without pushing in the clutch and it's in 3rd with a wide open throttle and it fires up! That would be a hoot! Video please Share this post Link to post Share on other sites
