Tom michael 0 #1 Posted 5 hours ago Hi all, have a c120 and i must have a bad spindle it shreaded the pto belt yesterday . I have a rear discharge 36 . 5 deck inside measurement . Can someone tell me the correct belt and length i need to get for it ? Where to buy as well ? Do has anyone had this problem with the c120 the spindles seem to spin free . Could it be something else seizing up the meal drive pully seem to Move easy Share this post Link to post Share on other sites
Ed Kennell 47,065 #2 Posted 3 hours ago to theTell us more about your C-120. Was it mowing fine before this happened? Did the belt burn or tear? If the spindle and mule drive pulleys are all free, it could be a stone or stick wedged in any of the four pullies used by the deck drive belt. I buy all my belts at TSC. Full refund if they don't fit. A picture of the belt may help. Share this post Link to post Share on other sites
parsonsponyz 404 #3 Posted 2 hours ago to Red Square. Share this post Link to post Share on other sites
peter lena 10,026 #4 Posted 1 hour ago @Tom michael there are 12 related bearings , to a pto , mule drive , deck spindle set up . bearing lubrication failure , INCREMENTALLY stops the rotation , also relates to rough or whyining noise . that stoppage , starts the belt bouncing ,violent stopping and starting . this is a very common occurrence to these bearings . another tell tell sign of bearing failure is pto lever belt squealing , at initial trial to spin up deck . agree with @ ED KENNELL on the possibilities of deck debris . pete Share this post Link to post Share on other sites
