B-80

[SylvanLakeWH 32,174]

So I'm down to two Black hoods after my A-60  started it's way to Wisconsin... And, well there's this B-80 pops up on MP for $50. Motor and trans are free, tires all have air, seat is to die for... so, Here's the obligatory pics and what I've done so far:

 

Carb dip - 3 times

New battery 

New battery cables 

Motor oil change (bad)

Trans oil change (really bad)

New fuel line and filter

Fresh rec gas

New air filter

Mouse house removal

 

She runs, but still getting some surging...

 

Still on the plate:

Dial in the carb / fix surge issue

Tires are tired...

Grease

Tie rods

Rewire lights

 

I'm sure something else will

pop up...

 

My C-125 is currently set up as a plow mule and back up snow machine. Not sure if this B-80 would be better suited to snow or mule duties... 

 

 

Edited 4 hours ago by SylvanLakeWH

[ri702bill 12,848]

Interesting assist torsion spring return thingy on the Clutch pedal - is there a heavy spring in the OE position too? (or was this a PO backyard "fix")

If that's it, there may not be enough force to keep the drivebelt tight enough...

[Pullstart 71,124]

6 minutes ago, ri702bill said:

Interesting assist torsion spring return thingy on the Clutch pedal - is there a heavy spring in the OE position too? (or was this a PO backyard "fix")

If that's it, there may not be enough force to keep the drivebelt tight enough...

good eye!  Spring clamp for a shop light or heat lamp?

[ebinmaine 80,393]

1 hour ago, SylvanLakeWH said:

Not sure if this B-80 would be better suited to snow or mule duties

 

I can't speak for the dirt plow dogs but B80 is a great snow plow rig. 

[ebinmaine 80,393]

18 minutes ago, ri702bill said:

Interesting assist torsion spring return thingy on the Clutch pedal - is there a heavy spring in the OE position too? (or was this a PO backyard "fix")

If that's it, there may not be enough force to keep the drivebelt tight enough...

 

@SylvanLakeWH

 

Get you a 108035 and maybe even add some to that on the inside. I have a couple tractors with double springs.

[ri702bill 12,848]

12 minutes ago, ebinmaine said:

I have a couple tractors with double springs.

Like going to the Gym every time you stop!

[ebinmaine 80,393]

25 minutes ago, ri702bill said:

Like going to the Gym every time you stop!

 

 

Use it or lose it!

[SylvanLakeWH 32,174]

1 hour ago, ri702bill said:

Interesting assist torsion spring return thingy on the Clutch pedal - is there a heavy spring in the OE position too? (or was this a PO backyard "fix")

If that's it, there may not be enough force to keep the drivebelt tight enough...

 

Yes PO POS...! 

 

yes it works, yes it's unique, not enough pressure so no it ain't staying... I have a bunch of trampoline springs I've used on previous projects - as @Pullstart knows...  it's on the list...

[SylvanLakeWH 32,174]

@Pullstart

@WHX??

@Achto

@AlexR

 

Thoughts on B-80 as plow mule vs the C-125?

 

I'm thinking new tires for B-80 due to extensive cracking and dry rot so ag / rib?

[ebinmaine 80,393]

40 minutes ago, SylvanLakeWH said:

@Pullstart

@WHX??

@Achto

@AlexR

 

Thoughts on B-80 as plow mule vs the C-125?

 

I'm thinking new tires for B-80 due to extensive cracking and dry rot so ag / rib?

 

 

I'm curious on this too. Do folks run a lot of small block tractors? 

Of course I realize everything before the mid 1960s is small but is there a leaning preference towards more weight or more torque? 

 

[WHX?? 57,824]

B-80 would make a fine plow mule with that 8" Brinly you have. I wouldn't even think twice about throwing a ten on. Heck maybe even a 12 just for a hold my beer and watch this. Guessing you would run out of traction before power in hard dirt. 

I had a no name eight that was a house mule and it did just fine.  

[ebinmaine 80,393]

1 minute ago, WHX?? said:

Guessing you would run out of traction

 

So is dirt plowing kinda like pulling heavy loads where the right amount of weight is probably more important?