Jimmy G 10 #1 Posted 3 hours ago Hi guys was wondering if anyone can tell me how I would bypass the safety switch for the PTO on my C121 The thing keeps dying and I have to wiggle the plug connector and hard to get it to work. The eapair guy at the shop re did the wires at the plug connector years ago and I just can't figure it out. Not sure how to post a photo of the plug. Sorry. I would like to keep it operational but hate when I am tilling and the thing dies out. Any help would be appreciated. Thanks Jim Share this post Link to post Share on other sites
953 nut 68,201 #2 Posted 3 hours ago We discourage the elimination of any safety device on any Wheel Horse. Share this post Link to post Share on other sites
Jimmy G 10 #3 Posted 3 hours ago 4 minutes ago, 953 nut said: We discourage the elimination of any safety device on any Wheel Horse. Don't want to eliminate it. Just want to bypass it so I can till my dirt. Hope to get it to my tractor guy that is 1.5 hours from me next week. He is not open on the weekends. Like I said I would like to keep it operational if someone could tell me how. All wires are intact but just vibrates and stops. Thought I could just throw a jumper wire to get it to work for the weekend. I have all the safety switches on it. 6 minutes ago, 953 nut said: We discourage the elimination of any safety device on any Wheel Horse. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,418 #4 Posted 3 hours ago Is this the switch? Click on the picture for more. Share this post Link to post Share on other sites
Jimmy G 10 #5 Posted 1 hour ago 1 hour ago, gwest_ca said: Is this the switch? Click on the picture for more. Yes that is the switch.. Share this post Link to post Share on other sites
