Just getting started 22 #1 Posted Friday at 07:34 PM I purchased a Wheel Horse a few years ago from a gentleman on Marketplace saying it was a 64' 754 7hp model # 48046. Now yesterday I listed it on Marketplace, this guy sends me a message today stating this model #48046 is an 854. Could someone clear this up for me. I don't know how to get pictures attached, sorry. It has a 754 lettering on belt guard, which I understand that could have been switched, but it still has a K161S engine in it. So, he sells m a 754 and now years later tells me I have an 854? Thanks, Dano. Share this post Link to post Share on other sites
stevasaurus 23,787 #2 Posted Friday at 07:59 PM For me, if it has the 754 belt guard and a 7hp Kohler then I would go with the 754. @gwest_ca may have a list of model numbers which may tell you what it might have been from the factory. 2 Share this post Link to post Share on other sites
squonk 47,804 #3 Posted Friday at 08:55 PM In 64 there was a shortage of 8 HP K 181's.So WH built the 854 model and put 7HP K 161's on them and calledthem 754's 4 1 Share this post Link to post Share on other sites
953 nut 68,239 #4 Posted Friday at 11:13 PM This is another reason to never go on Facebook, bunch of jerks who don't want to buy your stuff, just give you a hard time. OK, the serial number falls within the numbers listed for an 854 or a 754, in fact your serial number IS listed as a 754. Is this the absolute gospel, no but it is a point in your favor. 3 2 Share this post Link to post Share on other sites
sqrlgtr 3,628 #5 Posted yesterday at 01:13 AM 4 hours ago, squonk said: In 64 there was a shortage of 8 HP K 181's.So WH built the 854 model and put 7HP K 161's on them and calledthem 754's I never knew this learn sumin everday. 1 Share this post Link to post Share on other sites
wallfish 20,401 #6 Posted yesterday at 02:01 AM 754 is kind of a rare tractor and a collector's item because of the reason stated. There wasn't very many made. Most people may not know about them but a 754 is a real WH factory tractor which is basically an 854 with a 7hp engine 3 1 Share this post Link to post Share on other sites
Retired Wrencher 6,905 #7 Posted yesterday at 10:10 AM 8 hours ago, wallfish said: 754 is kind of a rare tractor and a collector's item because of the reason stated. There wasn't very many made. Most people may not know about them but a 754 is a real WH factory tractor which is basically an 854 with a 7hp engine John. If any one would know about this it would be you. Small engine guru! Share this post Link to post Share on other sites
Handy Don 17,217 #8 Posted yesterday at 02:13 PM 12 hours ago, wallfish said: 754 is kind of a rare tractor and a collector's item because of the reason stated. There wasn't very many made. Most people may not know about them but a 754 is a real WH factory tractor which is basically an 854 with a 7hp engine With the K161 having the 3-inch long air cleaner shell (versus 4” on the K181), it would not have needed the one-inch-longer 854 hood, right? Share this post Link to post Share on other sites
ri702bill 12,716 #9 Posted 22 hours ago (edited) 2 hours ago, Handy Don said: With the K161 having the 3-inch long air cleaner shell (versus 4” on the K181), it would not have needed the one-inch-longer 854 hood, right? Needed is the key word on this one.... Not sure if it had the longer hood or not. While repairing the original hood on my 854, I ran a shorter K161 air cleaner and 702 hood, still using the K181... Edited 22 hours ago by ri702bill 2 Share this post Link to post Share on other sites
Handy Don 17,217 #10 Posted 19 hours ago 2 hours ago, ri702bill said: Needed is the key word on this one Yep. My opinion is that a K181 with the K161 air cleaner gives you a max of 7 HP--and most of the time, that’ll be enough! 3 Share this post Link to post Share on other sites
Pullstart 71,019 #11 Posted 2 hours ago #restrictorplates I can’t say my butt dyno has ever felt the dIfference between 7 and 8 horsepowers. 1 Share this post Link to post Share on other sites
SylvanLakeWH 32,027 #12 Posted 1 hour ago (edited) 1 hour ago, Pullstart said: I can’t say my butt dyno has ever felt the dIfference between 7 and 8 horsepowers. Normally, pictures are demanded of unique tools, tractors or techniques... however, in this case the moderators thank you for not providing pictures of your Dyno... Edited 48 minutes ago by SylvanLakeWH 4 Share this post Link to post Share on other sites