hotajax 284 #1 Posted yesterday at 05:05 PM Good day gents, (and ladies - got to be fair, you know ): Do y'all have recommendation for a seat? No I don't need a beer can holder or stereo. Plain old seat. it's over 40 years old, the vinyl is nice and crispy and now cracked the whole length of it. Need something to support my fat ass that will bolt right on. Thank you gents. Share this post Link to post Share on other sites
hotajax 284 #2 Posted yesterday at 05:17 PM I remember one of you gents told me you bot a seat from TS, and it bolted right on. I can't remember who the member was, but the dealer was definitely Tractor Supply. If you can remember some details about the seat, I'd be appreciative. Thanks. Share this post Link to post Share on other sites
MainelyWheelhorse 3,024 #3 Posted yesterday at 06:29 PM (edited) I have a TS seat on my 308 it was a direct bolt on affair. One of the pre drilled bolt patterns in the seat bottom is the 7.5 x 7 Wheel Horse seat bolt pattern. I’d assume the others in that brand have the same pattern built in. It’s a bit expensive but I haven’t had an issue with the seat. Edited yesterday at 06:29 PM by MainelyWheelhorse 1 Share this post Link to post Share on other sites
hotajax 284 #4 Posted 23 hours ago 2 hours ago, MainelyWheelhorse said: I have a TS seat on my 308 it was a direct bolt on affair. One of the pre drilled bolt patterns in the seat bottom is the 7.5 x 7 Wheel Horse seat bolt pattern. I’d assume the others in that brand have the same pattern built in. It’s a bit expensive but I haven’t had an issue with the seat. Thanks for putting this up there. Do you have any issues swinging your leg over the higher back? 1 Share this post Link to post Share on other sites
MainelyWheelhorse 3,024 #5 Posted 22 hours ago @hotajax No, I usually just step over the shifter, on to the right or left foot board and sit down on the seat. 2 Share this post Link to post Share on other sites
rjg854 13,277 #6 Posted 22 hours ago On some of my tractors I sit on the side of the seat and swing my leg over the steering wheel. Most know I'm vertically challenged 2 3 Share this post Link to post Share on other sites
rjg854 13,277 #7 Posted 22 hours ago What kinda seat do you have now? Share this post Link to post Share on other sites
CRF857 516 #8 Posted 21 hours ago 1 hour ago, rjg854 said: On some of my tractors I sit on the side of the seat and swing my leg over the steering wheel. Most know I'm vertically challenged Heck, I am 5’ 13” (6’-1”) and I do that on most of my tractors. Certainly don’t like kicking it into gear with my big feet while trying to not fall off. 1 1 Share this post Link to post Share on other sites
953 nut 68,226 #9 Posted 20 hours ago Never mount or dismount a running garden tractor or anything else. 1 Share this post Link to post Share on other sites
hotajax 284 #10 Posted 6 hours ago @rjg854I have the original seat. Has a nice Wheel Horse logo imprinted on the seat. Share this post Link to post Share on other sites
Handy Don 17,214 #11 Posted 5 hours ago 14 hours ago, 953 nut said: Never mount or dismount a running garden tractor or anything else. Leg swing over the steering wheel (lower the implement lift arm to make it easier) and engine off for mount & dismount are my habits as well. Exception only for yank-start! Share this post Link to post Share on other sites
adsm08 4,921 #12 Posted 36 minutes ago 22 hours ago, rjg854 said: Most know I'm vertically challenged That's better than being horizontally blessed. Share this post Link to post Share on other sites