310-8 Wheelhorse Tractor fuel line location

[Vinnie 11]

I have a 310–8 Wheelhorse Tractor The fuel line was Run next to the serum column mechanism and it cut the line. I am replacing the fuel, but I’m not sure the location around the steering mechanism. Anyone have any ideas on how to get it through?  I attached a video to show you the issue.  Thanks again for your help.

[cleat 9,151]

This is where I routed mine on the 416 I built last year.

I know you don't have that hydraulic line but you could fasten it there another way.

 

[peter lena 10,000]

@Vinnie  opportunity  staring right at you ? if you tuck a line INSIDE THE  FRAME LENGTH INNER 90 DEG  BEND , it disappears , another  option with this , would be to make that  long frame length run , with ?  1/4 or 516  steel brake line ? ELIMINATE  THAT FUEL HOSE BREAK DOWN ZONE , that frame 90 deg bend easily holds mounting spots , minimizing rubber hose , along with , sta bil in all my  fuels , have zero debris in any related filter  or carb bowl , doing this for years , regularly  go after  REPEDETIVE ISSUES . MAKE A CHANGE , PETE

[Vinnie 11]

Thanks for your help. Would anyone have pictures of a 310 tractor with how they routed the fuel line?

[cleat 9,151]

2 hours ago, Vinnie said:

Thanks for your help. Would anyone have pictures of a 310 tractor with how they routed the fuel line?

 

Here is how I routed the fuel line on my 520-8 which is very close to your 310 except you need the line to be a little longer to run to the front of the engine.

 

[sqrlgtr 3,669]

6 hours ago, cleat said:

Here is how I routed the fuel line on my 520-8 which is very close to your 310 except you need the line to be a little longer to run to the front of the engine.

Same as @cleat but on a 520H and not near as clean and shiny.