Jump to content
Retired Wrencher

Clean the safe way.

Recommended Posts

 
953 nut

D you have a link to the video or the product?

  • Like 2

Share this post


Link to post
Share on other sites
 
ebinmaine

Looks like this gives excellent results. 

 

Remember to hand plane the cylinder head for flatness too.  

 

 

  • Like 2

Share this post


Link to post
Share on other sites
 
peter lena

@Retired Wrencher  that  fuel,  oil related varnish , is the issue , 2 things  I changed to years ago ,  sta bil , enhances fuel cleaning  debris , another  major cleaner ?  zinc, been adding  rislone zinc , typically 2 to3 oz  to a fresh  oil change , also like the valvoline 10-30 VR1 flat tappet  oil , no smoke or varnish . repetitive problems , are  simply  something  I have to get after . after EVERY USAGE , I go after a regular check over  , for  FEED  BACK , HOW IS IT DOING ?  WHAT IS IT DOING ?  need a tweak ?  over 40 years , regular maintenance  , go to what makes it bombproof , my screaming pto neighbor , has no clue , pete  

  • Like 3

Share this post


Link to post
Share on other sites
 
8ntruck
32 minutes ago, peter lena said:

valvoline 10-30 VR1 flat tappet  oil

First I've heard of this product.  I wonder how the specs compare to the Rotella 30 wt?

Share this post


Link to post
Share on other sites
 
peter lena

@8ntruck  actually  its a very good , oil  made for older type engines , with  the latest  upgrades , thing I notice most is , operational , running ease , definitely  happier , smoother  , also  better on fuel for related usage . none of my engines , smoke  in any phase. near instant starts , very impressed  with its smooth  / quick response . no oil  usage at all , better  fuel  use , my experience , pete 

  • Like 1

Share this post


Link to post
Share on other sites
 
sqrlgtr
4 hours ago, 8ntruck said:

First I've heard of this product.  I wonder how the specs compare to the Rotella 30 wt?

Ive used both and have had good luck with both. The VR1 has a higher zinc content and is designed for run in flat tappet race engines (high rpm) and not as easy to find, around these parts anyhow.

Share this post


Link to post
Share on other sites
 
squonk

I wouldn't knock yourself out looking for VR1 oil over Rotella.

 

These are lawn mowers. Not Indy cars or space ships! 

  • Like 3
  • Excellent 1
  • Thanks 1
  • Haha 1

Share this post


Link to post
Share on other sites
 
8ntruck
15 minutes ago, squonk said:

I wouldn't knock yourself out looking for VR1 oil over Rotella.

 

These are lawn mowers. Not Indy cars or space ships! 

Yup.  Our wide open speed isn't much more than the idle speed on some of those race engines.

 

Share this post


Link to post
Share on other sites
 
pfrederi

Over the years I have use synthetic , expensive stuff and wally world stuff...never heard an engine sound different Haven't had an oil related failures either...

  • Like 2
  • Excellent 1

Share this post


Link to post
Share on other sites
 
ebinmaine

Change it on time. That is all.  

  • Like 3
  • Excellent 1

Share this post


Link to post
Share on other sites
 
Retired Wrencher
22 hours ago, 953 nut said:

D you have a link to the video or the product?

Yes. Just not sure of location. I see if I can post link.

Share this post


Link to post
Share on other sites
 
Retired Wrencher
21 hours ago, ebinmaine said:

Looks like this gives excellent results. 

 

Remember to hand plane the cylinder head for flatness too.  

 

 

I will Eric. Thanks.

Share this post


Link to post
Share on other sites
 
Retired Wrencher
23 hours ago, 953 nut said:

D you have a link to the video or the product?

Just can not find the like Richard. I am Computer illiterate. I just get buy. 

  • Like 2

Share this post


Link to post
Share on other sites
 
953 nut
21 hours ago, 8ntruck said:

First I've heard of this product.  I wonder how the specs compare to the Rotella 30 wt?

VR1 would be about the same as any oil made for use in a deisal engine.

16 hours ago, squonk said:

These are lawn mowers. Not Indy cars or space ships! 

:confusion-confused:                         Not too sure how long an Indy Car or a Space Ship would hold up with ValvolineVR1 or Rotella 30                :scared-eek:

Page 14 | Explosion emoji Images - Free Download on Magnific ...

Share this post


Link to post
Share on other sites
 
Cee245

 

 

I found it.  I first watched this years ago when I did my 416h

Share this post


Link to post
Share on other sites
 
Retired Wrencher

Thanks for the post CEE!

Share this post


Link to post
Share on other sites
 
Wild Bill 633
On 8/1/2026 at 10:06 AM, peter lena said:

zinc, been adding  rislone zinc , typically 2 to3 oz  to a fresh  oil change , also like the valvoline 10-30 VR1 flat tappet  oil

Per the Valvoline product info sheet, VR-1 10W30 has 1100 ppm zinc.

Per the Risoline product data sheet, "With typical SN rated oil at a 7% dosage rate (4.5 oz. added to 2 qts.) expect levels to be raised a total of 1700-1800 ppm."

Standard oils, for example SN, have a max. 800 ppm, due to catalytic converters.

Older flat tappet engines benefit from 1000-1200 ppm.

Danger zone: levels pushed past 1400-1900 ppm cross the threshold where corrosive damage and accelerated wear start to take over.

Adding Rislone zinc additive to Valvoline VR-1 pushes the zinc ppm into the danger zone.

As a famous tribologist, Lake Speed Jr. says, "If you have to use additives to oil, then you are using the wrong oil."

Edited by Wild Bill 633
  • Excellent 2

Share this post


Link to post
Share on other sites
 
Bar Nuthin
On 8/1/2026 at 7:01 AM, 953 nut said:

D you have a link to the video or the product?

 

I believe these are the style of discs he's referring to. I can't see @Retired Wrencher's photos.

Available from several different suppliersin arbor style or the twist in Roloc style, with 3M/Scotchbrite being a premium mfr.

When I worked at a GM dealership, GM mandated this type of disc over the standard ROLOC discs due to fibers that could possibly shed.

 

click photo to see on Amazon

spacer.png

Edited by Bar Nuthin

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...