Jump to content
Sign in to follow this  
nyquil junkie

New model; A 520-312-H project

Recommended Posts

nyquil junkie

Ive been torturing myself not to chop up this fairly good 312h..

 

20260722_192724.jpg.0d92c0e3714e57ed53f705368806c2d4.jpg

 

The other day I picked up this 520 roller I used to own, got traded and they blew the engine so whats left is mine again (with the plow).

 

20260725_205104.jpg.e818401eed3d1656e31320a5da2c8715.jpg

 

The 312s Kohler M12S engine  runs really nice... easy start, quiet, no smoke, smooth at all rpms. I was debating on selling the whole tractor and buying a new 420 Harbor fright engine, I have good luck with those. But, this whole tractor cost me about $75. It has good tires, no rot on them. The right side axle has a weep. Its got rust and dents. the hydro lever is in a bad place for me, i personally don't like it there. If I use what I need to make a good solid tractor, I figure I can sell or salvage whats left and maybe be slightly ahead of the curve. 

 

Because I cant buy that engine and the tires for 75 bucks anywhere... So here we go.

 

Along this slow train wreck I'm gonna need some input so I don't do anything stupid...as I often tend to do. :lol:

 

The 520H has the hydro drive levers on the steering column. :thumbs: The rear ag tires are almost new, those are going on the 520 loader. Everything is relatively tight, I serviced that trans when I had it before, it worked great. My brother who I traded it to didn't run it very long before he did... something to the big Onan engine and it got parked. So its a good solid roller. The entire wiring system has been stripped out of it. 

 

And I can add another plow attachment to my growing forest of the things, I need to list em all for $50 each and make room. I'll keep one for the newly minted 520-312H MK1.

 

So, for Step 1 >>>engine removal and transplant.  All I need is the key to start/stop it and for it to charge the battery. My options in my head are 1) build a new wire harness or 2) carefully remove the whole wire harness from the 312, and stuff it in the 520.  What I do not know is, what will this engine function normally with and without, as it pertains to the electrical system. 

 

Unless someone has a better idea...

 

So whats the group opinion for step 1?   

Edited by nyquil junkie
  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...