AHS 1,695 #1 Posted 16 hours ago i was messing around with headlights and left the key on for 6 hours. Oops!! What a bone head!! So, the lights would work. I turned it to start and nothing. I took out the key switch, expecting to find a 6 prong and i only find 5!! wait… a Magnum and a 5 prong key switch?? now, the 5 prong looks old, likes It’s been in the tractor for quite a while AND it runs excellent! Now, the 5 prong looks like the lower right hand prong looks like it runs the key switch…but the continuity meter says otherwise! I don’t know what to do? Just replace it w/ a 100990 or… reaplace it with a 100991 6 prong and run a ground wire? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,361 #2 Posted 16 hours ago It is a switch for magneto ignition #116338. If you replace with another part number switch makes sure the other terminals are connected to the appropriate wire. 1 Share this post Link to post Share on other sites
AHS 1,695 #3 Posted 5 hours ago I figured it out now! Thanks! Share this post Link to post Share on other sites
