PTO replacement belt

[mjf8267 0]

I'm loosing my mind!  I have a 1998 522xi model 73561.  I have a 1998 52" side discharge mowing deck model 78370 . I need a replacement PTO drive belt. I've replaced it in the past and now I cant determine the part number for the life of me. I also have the 42" snowthrower, but the PTO V-belt is not the same length belt (and I already have a replacement in my shed if needed). I've looked on the Toro website but can't seem to find the part in the tractor parts or the mower deck parts - what the heck am I missing, doing wrong?

[gwest_ca-(File Mod) 12,358]

Belts are listed in the mower ipl. Click on the picture in the link and they are on the page that comes up.

 

[JoeM 10,098]

Toro xi belt notes

 

95-4094 (5/8" x 96.7") drive belt for 52" deck  - This belt is correct and also used with 44" decks

 

[953 nut 67,433]

@mjf8267, if you would like to tell us more about your Wheel Horse  and how you came to own it pleas do an introduction.

https://www.wheelhorseforum.com/forum/47-introductions/

[peter lena 9,943]

@mjf8267 while zeroing in on those belts , most important part of that is ?   rotational  movement  EASE AT EVERY PULLEY  , its the COLLECTIVE DRAG that  kills any belt set up , look for any bearing hang up or roughness , of course bearing  WHINE  IS TELLING YOU WHAT ? LUBRICATION FAIURE  !  that  related failure  also  EATS PTO DRIVE CLUTCHES , every  / any  related movement area , should move with , smooth / solid / ease . have this set up on my 3  horses , many years in , absolutely  no related failures or  movement issues , isn,t that what you want ?  easy to remove bearing , side grease  shields , wipe out , carb cleaner  flush  out , repack with lucas xtra  hd green chassis grease , 550 deg flash point , polyurea rated , stays with bearing , making sense ? I have no bearing failures / or related whyining , basic set up for my 3 horses , never failed , pete