meadowfield 3,048 #1 Posted yesterday at 01:46 PM (edited) As I’ve always got so much time free and so many projects, the ideas as usual keep going round in my head. I’ve plans for quite a few designs and here is the next one that’s in design…. The little 400 is waiting for a hood and a paint job, in the meantime it might be getting an upgrade. hot on the heels of Ewan’s 704, I’ve a simpler idea to add 4 wheel drive to yet another Wheel Horse 😂 out comes the parts bucket, and the scrap pile is set to with an angle grinder, a welder and lathe! first stop a peerless transaxle diff with a sprocket added Then making a bearing carrier Shiny axle case Hub bearing and the start of the steering knuckle A finished swivel and UJ carrier, need to crack on with the other side! Edited yesterday at 01:49 PM by meadowfield 6 8 4 Share this post Link to post Share on other sites
ri702bill 12,470 #2 Posted yesterday at 02:47 PM Nice work. What keps the stub shaft located in the bearing sleeve? I do not see any snap rings... 1 Share this post Link to post Share on other sites
AlexR 3,066 #3 Posted 23 hours ago Awesome!! I love seeing your projects. Looking forward to seeing what you do with this one. 1 Share this post Link to post Share on other sites
rjg854 13,179 #4 Posted 19 hours ago will be watching as this project takes shape 2 Share this post Link to post Share on other sites
953 nut 67,363 #5 Posted 17 hours ago Your imagination is only exceeded by your skillful execution of the projects you have done. Can't wait to see this one come together. 1 Share this post Link to post Share on other sites
meadowfield 3,048 #6 Posted 9 hours ago 16 hours ago, ri702bill said: Nice work. What keps the stub shaft located in the bearing sleeve? I do not see any snap rings... I've a groove to cut when I make the drive hub and splines... 1 Share this post Link to post Share on other sites
