meadowfield 3,042 #1 Posted 15 hours ago (edited) As I’ve always got so much time free and so many projects, the ideas as usual keep going round in my head. I’ve plans for quite a few designs and here is the next one that’s in design…. The little 400 is waiting for a hood and a paint job, in the meantime it might be getting an upgrade. hot on the heels of Ewan’s 704, I’ve a simpler idea to add 4 wheel drive to yet another Wheel Horse 😂 out comes the parts bucket, and the scrap pile is set to with an angle grinder, a welder and lathe! first stop a peerless transaxle diff with a sprocket added Then making a bearing carrier Shiny axle case Hub bearing and the start of the steering knuckle A finished swivel and UJ carrier, need to crack on with the other side! Edited 15 hours ago by meadowfield 5 5 3 Share this post Link to post Share on other sites
ri702bill 12,467 #2 Posted 14 hours ago Nice work. What keps the stub shaft located in the bearing sleeve? I do not see any snap rings... Share this post Link to post Share on other sites
AlexR 3,065 #3 Posted 11 hours ago Awesome!! I love seeing your projects. Looking forward to seeing what you do with this one. Share this post Link to post Share on other sites
rjg854 13,176 #4 Posted 7 hours ago will be watching as this project takes shape 1 Share this post Link to post Share on other sites
953 nut 67,356 #5 Posted 5 hours ago Your imagination is only exceeded by your skillful execution of the projects you have done. Can't wait to see this one come together. Share this post Link to post Share on other sites
