1968Commando 189 #1 Posted July 19 Putting this decal on, my uncle put a switch on the tractor for a 12 volt pump. Well I forgot to cover the hole, I was just going along cutting out the holes.. and I cut the wrong one…🥴 1 Share this post Link to post Share on other sites
Retired Wrencher 6,793 #2 Posted July 19 It happens. You are enjoying the project and and you do not think of every move. And that happens. It is not that bad. 1 Share this post Link to post Share on other sites
1968Commando 189 #3 Posted July 19 This time im going to bondo it and @Vinylguy is helping me out with getting me a new one. Can’t thank you enough terry your a great guy. 6 2 1 4 Share this post Link to post Share on other sites
JCM 11,260 #4 Posted July 19 2 hours ago, 1968Commando said: . Can’t thank you enough terry your a great guy. YES HE IS. 1 2 1 Share this post Link to post Share on other sites
1968Commando 189 #5 Posted July 20 8 hours ago, Retired Wrencher said: It happens. You are enjoying the project and and you do not think of every move. And that happens. It is not that bad. Funny thing is is I’ve had the dash decal for awhile, I just never got the decal put on because 2 weeks after the tractor was done we moved houses. So now I’m just getting to it. 2 Share this post Link to post Share on other sites
Retired Wrencher 6,793 #6 Posted July 20 It will get better after you settle in your new house. Share this post Link to post Share on other sites
1968Commando 189 #7 Posted July 20 It’s been almost a year. My tractor doesent stay at the new house though. So it’s difficult to find time to get it over Share this post Link to post Share on other sites
1968Commando 189 #8 Posted 9 hours ago Got the new decal put on!, it’s got some bubbles probably just gonna leave it. Looks good thought I’m still happy. Thank you to @Vinylguy for the help your a great guy. Thank you for helping the young buck out Share this post Link to post Share on other sites
sqrlgtr 3,300 #9 Posted 8 hours ago (edited) 50 minutes ago, 1968Commando said: it’s got some bubbles probably just gonna leave it. If it's just air bubbles and nothing under there you may be able to take a pin and poke small hole in them and get air out. I have done this before and have had pretty good luck doing it that way. You could try one and see, Ive never tried it on the silver dash decal though and pin hole may be more visible than its worth. Edited 8 hours ago by sqrlgtr Share this post Link to post Share on other sites
1968Commando 189 #10 Posted 3 hours ago Installed on the tractor, it really isn’t terribly noticeable so I think I’ll just keep it, I think it got some dirt or somthing under the decal. 1 Share this post Link to post Share on other sites
