JOEPOE1977 0 #1 Posted 2 hours ago (edited) I have a 1990 Wheel Horse 310-8. It has a 42 inch recycler deck. The deck has the original spindles on it and the Kohler MC10 has the original PTO clutch on it. I am continuing to burn and break belts on this unit. New blades on the deck which I just bought for a member on the sight. The last belt lasted me less than 3 hours. Any help very much appreciated on this. Thank you as always. Edited 2 hours ago by JOEPOE1977 Share this post Link to post Share on other sites
ri702bill 12,398 #2 Posted 1 hour ago Joe - Welcome!! Which belt is the problem one? The drive belt from the PTO or the belt that drives the 3 spindles?? Either case, it sounds like it is an alignment or bad bearing issue... Share this post Link to post Share on other sites
Ed Kennell 46,465 #3 Posted 39 minutes ago to the Joe. Pictures of the pulleys involved may help us see the problem. Share this post Link to post Share on other sites
rjg854 13,155 #4 Posted 33 minutes ago Yes pictures would be a big plus. Share this post Link to post Share on other sites
