Pullstart 70,467 #26 Posted 7 hours ago It’s supposed to be 95 or hotter today. The shop just barely fits the new trailer! The shop A/C is on for a bit to bring the temps down to something a bit more comfortable. Rubber flooring and e-track is all here, that’s exciting! 1 6 Share this post Link to post Share on other sites
Pullstart 70,467 #27 Posted 6 hours ago I have the main floor piece rough cut. I need to trim the front corners to a respectable lip. Then find some adhesive laying around and slap it down. 1 3 Share this post Link to post Share on other sites
Pullstart 70,467 #28 Posted 6 hours ago I am very thankful for the shop to keep me comfy. It’s a scorcher out and it’s not even the high for the day. Pool was at 92 last I checked by the way. 2 Share this post Link to post Share on other sites
ebinmaine 79,545 #29 Posted 5 hours ago 51 minutes ago, Pullstart said: thankful for the shop to keep me comfy Absolute game changer. I can no longer tolerate the heat and humidity. My workshop has AC. 2 Share this post Link to post Share on other sites
Pullstart 70,467 #30 Posted 2 hours ago I use 2 28oz tubes of HD adhesive, and the floor is glued in on bottom. I still need to cut the door opening and lay some metal over the side flaps. The back edge is still long. I may leave it a bit long, so any wet tires coming in won’t allow moisture at the edge. Let the door press seal it down, if you will. The e-track is 57 lbs and 5’ long. I figured it would work well to press the bubbles out, so I worked it front to rear a few times. I like the outcome. 2 Share this post Link to post Share on other sites
rjg854 13,157 #31 Posted 1 hour ago Before cutting that, how about leaving it for like a baseboard. Share this post Link to post Share on other sites
Pullstart 70,467 #32 Posted 25 minutes ago 57 minutes ago, rjg854 said: Before cutting that, how about leaving it for like a baseboard. Tis my plan, kind of. Share this post Link to post Share on other sites
