Time to find a tractor

[OoPEZoO 602]

So my oldest “kid” just closed on her first house.  Nice property, about 1/2 acre, decent sized gravel driveway.  The previous owners are leaving them a JD L110 with some minor issues that will allow them to mow grass the rest of the season but is not the right solution. They need a proper tractor.  I’ve already decided I want to find/put a WH together for them…..or course this happens just weeks after the big show…DOH!  Anyway, son in law is mechanically capable (daughter, not so much) but I’m close enough to help with the learning curve.  Here are my thoughts, please feel free to add suggestions or ideas.

 

i think I’d like to find them a single cylinder tractor with a hydro trans and preferably hydraulic lift as well.  Something like a 314H or similar. 42” or 48” deck would get the job done.  Worst case, I could slap my old 36” RD on it. Also thinking a plow setup for winter.  I think that would be preferred over a snow blower due to the gravel.  Son in law is a chef, and they have had nice gardens at their previous places.  If it works out, I wouldn’t be surprised if they would be plowing out a decent garden in a year or two.  I was thinking this setup would give them the biggest flexibility with the least complexity.
 

not a help/wanted ad, just looking for input from anyone who has done something similar for someone

[squonk 47,212]

I would go with an older C series like a C-120. There is enough sheet metal and bits in the way on the newer 300 series when it comes to getting at the rock shaft connection when changing attachments. Plus I think the metal and paint is more durable on the older models.

[ebinmaine 79,460]

24 minutes ago, squonk said:

I would go with an older C series like a C-120.

 

I agree with @squonk..

 

1977 or older WILL BE easier to maintain, repair, and switch implements.  

 

I may be a little bit biased here seeing as how my whole fleet except 2 are older.

 

One of those two will be swapped to an older chassis. The other is The Ugly Bruce tractor which will stay as is. 

 

 

 

24 minutes ago, squonk said:

There is enough sheet metal and bits in the way on the newer 300 series when it comes to getting at the rock shaft connection when changing attachments.

 

  Anything 1978 or later.

24 minutes ago, squonk said:

Plus I think the metal and paint is more durable on the older models.

 

 

 

1 hour ago, OoPEZoO said:

Here are my thoughts, please feel free to add suggestions or ideas.

 

Too bad you're not a little closer. I've got quite a parts pile & assortment of implements here.