1968Commando 172 #1 Posted yesterday at 03:55 AM Hello everyone, I bought my wheel horse stickers probably a year ago anyways I put all the stickers on except the dash sticker… is it probably ruined now?? It’s a little wrinkled from the weather and humidity from sitting in the garage and such? Do I need a new one? Also how do you go about applying these properly without bubbles and cleanly Share this post Link to post Share on other sites
JCM 11,234 #2 Posted yesterday at 08:29 AM Back around the year 2000 I repainted this 1986 312-8 and installed OEM decals dry. Being older now I use either a small amount of Dawn dish shop mixed with water or my preferred method is Windex WITHOUT ammonia works very well. Patience helps a lot. Good luck 1 Share this post Link to post Share on other sites
Achto 32,025 #3 Posted yesterday at 10:50 AM 6 hours ago, 1968Commando said: It’s a little wrinkled from the weather and humidity from sitting in the garage and such? Do I need a new one? Also how do you go about applying these properly without bubbles and cleanly Like suggested above, spray some soapy water on the dash first. Use a plastic body filler spreader or a credit card to help flatten the decal out on to the part. Always start in the middle of the decal and work towards the outside. 3 1 Share this post Link to post Share on other sites
Racinbob 13,010 #4 Posted yesterday at 11:05 AM I believe you're talking about this style dash similar to the 500 Special I did. Terry's decals are typically very easy and forgiving to apply but these dash decals might be the toughest. Make sure the surface is prepared very well. The metallic decal will show any imperfection. I primed, sanded and cleaned it like I was going to apply paint. Since this decal is so different from the others I started at the bottom and slowly worked my way up fitting it tight to the ridge across the center. The credit card thing works very well although I used an AARP card. 2 3 Share this post Link to post Share on other sites
WHX?? 57,169 #5 Posted yesterday at 12:46 PM I would just use the one you have. If it doesn't work out Terry will probably be more than happy to send another if it screws up. He's good about that. 1 Share this post Link to post Share on other sites
1968Commando 172 #6 Posted 21 hours ago Thank you, yes this is my dash. This it what it looks like right now. Share this post Link to post Share on other sites
Retired Wrencher 6,751 #7 Posted 10 hours ago 23 hours ago, Racinbob said: I believe you're talking about this style dash similar to the 500 Special I did. Terry's decals are typically very easy and forgiving to apply but these dash decals might be the toughest. Make sure the surface is prepared very well. The metallic decal will show any imperfection. I primed, sanded and cleaned it like I was going to apply paint. Since this decal is so different from the others I started at the bottom and slowly worked my way up fitting it tight to the ridge across the center. The credit card thing works very well although I used an AARP card. Bob I found out by cutting it in half helps a lot to apply the decals. Also a slow peel back of the two parts. Just my Share this post Link to post Share on other sites
WHX?? 57,169 #8 Posted 6 hours ago 3 hours ago, Retired Wrencher said: Bob I found out by cutting it in half helps a lot to apply the decals. Your not the first guy I heard that from Wrencher. Dan I noticed some funkyness going on with the dash on Radferd. Will get some pics. Your biggest chore is going to be removing everything to get the dash on the work bench Commando. Then having to put it all back together. Share this post Link to post Share on other sites
WHX?? 57,169 #9 Posted 5 hours ago (edited) 1 hour ago, WHX?? said: funkyness going on with the dash on Radferd. So I don't what happened here. Looks worse in sunlight and I'm sure what with @Achto's analness for prepping it was done proper. Something else to watch for is don't rely on the D hole to keep the knob base from turning during tightening. I hate to tell you to clamp a vice grips on it. Will mar it for sure. Every one I have done did this you think I would have learned. Possibly cut the decal out from under the knob with an exacto knife so it doesn't set on the decal??? Same with the four corner screws and switches. Use plastic washers underneath. Looks like Dan cut the decal just above the black to silver transition. Edited 4 hours ago by WHX?? 1 Share this post Link to post Share on other sites
Retired Wrencher 6,751 #10 Posted 1 hour ago (edited) 5 hours ago, WHX?? said: Your not the first guy I heard that from Wrencher. Dan I noticed some funkyness going on with the dash on Radferd. Will get some pics. Your biggest chore is going to be removing everything to get the dash on the work bench Commando. Then having to put it all back together. The first one I did not come out right. So the second one I cut it and it was a lot better that way. I also sanded it with fine sand paper to smooth surface. This made it easy. Edited 1 hour ago by Retired Wrencher Share this post Link to post Share on other sites
