Teddy da Bear62 172 #1 Posted 3 hours ago Guys & Gals I am getting one of my tractors ready to loan out to my girlfriend (the boss). However, it's sat for a number of years. It cranked over fine. Added gas and it spewed it right out the muffler. Figured stuck needle and seat or float. Carb needed cleaned. Yeah I was right. This was not the kind of carburator I was used to. It had plate on top for linkages to governor. Unfortunately I didn't take any photos as I should have and now I'm having trouble getting it back together properly as I should. A real amateur mistake. Can anyone help me out with photos or a detailed diagram of these linkages and springs? Thanks! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,283 #2 Posted 3 hours ago This model uses a VM-80 Tecumseh engine. Share this post Link to post Share on other sites
Teddy da Bear62 172 #3 Posted 2 hours ago 15 minutes ago, gwest_ca said: This model uses a VM-80 Tecumseh engine. I went to parts tree and looked at a very blurry diagram. Exploded diagram is just no help unfortunately. I need a photo of fully assembled speed control plate and linkages that sits a top the carburator. Share this post Link to post Share on other sites
pfrederi 20,692 #4 Posted 2 hours ago Sorry no vertical techy Share this post Link to post Share on other sites
