Teddy da Bear62 172 #1 Posted June 19 Guys & Gals I am getting one of my tractors ready to loan out to my girlfriend (the boss). However, it's sat for a number of years. It cranked over fine. Added gas and it spewed it right out the muffler. Figured stuck needle and seat or float. Carb needed cleaned. Yeah I was right. This was not the kind of carburator I was used to. It had plate on top for linkages to governor. Unfortunately I didn't take any photos as I should have and now I'm having trouble getting it back together properly as I should. A real amateur mistake. Can anyone help me out with photos or a detailed diagram of these linkages and springs? Thanks! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,435 #2 Posted June 19 This model uses a VM-80 Tecumseh engine. Share this post Link to post Share on other sites
Teddy da Bear62 172 #3 Posted June 19 15 minutes ago, gwest_ca said: This model uses a VM-80 Tecumseh engine. I went to parts tree and looked at a very blurry diagram. Exploded diagram is just no help unfortunately. I need a photo of fully assembled speed control plate and linkages that sits a top the carburator. Share this post Link to post Share on other sites
pfrederi 21,021 #4 Posted June 19 Sorry no vertical techy Share this post Link to post Share on other sites
Teddy da Bear62 172 #5 Posted June 20 I think I'm screwed. I neglected to go to MIT for my degree to adjust this thing. And none of these show the speed control plate that mine has with the additional armitures and do-dads. Share this post Link to post Share on other sites
