Jump to content
River Rat

Belt number for the Mule Drive on a C145A (1984)

By River Rat, in Implements and Attachments

Recommended Posts

River Rat    1

River Rat
Posted

I am looking for the Wheel Horse part number for the Mule Drive belt on my 1984 C145A 11-14KE01. I believe it is 102742. The old one is stretched quite a bit and not sure the outside length. possibly 1/2 by 103 in? 48 inch mower. 

Any help is appreciated!

 

 

 

 

 

 

 

 

 

 

 

 

 

Share this post

Link to post
Share on other sites
 

gwest_ca-(File Mod)    12,450

gwest_ca
Posted

Click on the fuzzy picture in the link. The belts are listed on the page that comes up. May not be the exact deck you have but the belts will be the same.

 

Share this post

Link to post
Share on other sites
 

953 nut    68,448

953 nut
Posted

:WRS:

The deck belt for a 48" side discharge is a 102742 which is 1/2"  X  103"     Many of us are having good luck with Tractor Supply Kevlar belts, in your case it will be a 1/2"  X  103"  and cost about $ 30.00.

  • Like 1

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • rustyedge1
      Whee Horse 102742 belts wearing poorly. Advice on better made ones.
      By rustyedge1
      Belt in photo is K Force brand A 102742 which is what my local parts place is pushing at 30 bucks plus.
      This one was bought two seasons ago counting this mowing season and it’s not going to make it looks like..
      Any info on better made belts appreciated..
    • jmack
      Xi V-Belt Size to Connect 60” Deck
      By jmack
      What’s the correct v-belt size for a xi drive belt connecting to a 60” deck?  
       
      Just shredded mine today. 
    • ryobi.warrior
      314-8 Mower Deck Belt Contacting Bracket
      By ryobi.warrior
      The belt on my Wheel Horse 314-8 mower deck (05-37SC01) appears to be contacting the deck bracket between the spindle pulleys. I am a novice when it comes to Wheel Horse maintenance (at best), but this does not seem correct.
       
      I recently inherited this Wheel Horse, so I do not know the maintenance history. Unfortunately, the mechanic who previously worked on it was a no-show for a scheduled maintenance visit.
       
      Any advice on how to address this? Thanks in advance... this seems like a great forum and I'm looking forward to spending time here!
       
      Photos (please forgive the dirt and grime, I plan to clean it up!): https://imgur.com/a/4PknZuJ




    • seven
      Rear tiller
      By seven
      Does anyone know what size belt is required for the rear mounted tiller off of a charger 12
    • JackHorse
      Drive belt came off idler C85
      By JackHorse
      Hi Guys, Had a random occurrence this week. Mowing along with my C85 eight speed in 1 low (grass was thick and wet), went to depress clutch and the drive belt jumped off the idler. I've had this tractor 3 years and it's been working great.  The belt itself looks good except the top of it was a bit chewed up in a short section which I believe happened after it came off.  I put the belt back on and continued to mow with no further issue.  Any ideas as to why this would happen or adjustments I might need to make to prevent another incident? Thanks 
×
×
  • Create New...