Easton Rich 1,251 #1 Posted Friday at 05:24 PM Been looking thru the forums for a belt size for my 76' B-80 8spd and I can't find one. I know I'm missing it. Whats the size? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,283 #2 Posted Friday at 05:56 PM Transmission drive belt 78-7100 replaced by 7473 - HB x 81.9" or 5/8" x 81.9" You will find it here. Click on the fuzzy part 1 1 Share this post Link to post Share on other sites
squonk 46,894 #3 Posted Friday at 06:30 PM TSC 5L820 1 1 Share this post Link to post Share on other sites
Easton Rich 1,251 #4 Posted Friday at 09:22 PM You guys always come through! Share this post Link to post Share on other sites
Lee1977 7,646 #5 Posted Tuesday at 12:29 PM If you get it from Tractor Supply you need to check both the sleeve and belt. Some people take them out and put them back in the wronge sleeve. 2 1 Share this post Link to post Share on other sites
Lagersolut 802 #6 Posted yesterday at 02:25 AM (edited) 13 hours ago, Lee1977 said: If you get it from Tractor Supply you need to check both the sleeve and belt. Some people take them out and put them back in the wronge sleeve. This applies to everything you buy - the days of reaching in a bin - pulling it off the rack or grabbing a handful is over - it drives me totally nuts Edited yesterday at 02:26 AM by Lagersolut Share this post Link to post Share on other sites
ineedanother 2,498 #7 Posted 4 hours ago 23 hours ago, Lagersolut said: This applies to everything you buy - the days of reaching in a bin - pulling it off the rack or grabbing a handful is over - it drives me totally nuts The plumbing section in a big box is the worst. No one maintains the stock anymore. Share this post Link to post Share on other sites
WHX?? 56,853 #8 Posted 4 hours ago It's not about checking stock ... its about guys like Squonky throwing 5/16 nuts in the 1/4 bin. Share this post Link to post Share on other sites
