Retired Wrencher 6,700 #1 Posted 1 hour ago This is from the experience I went through the last couple days. It pertains to a B 100 that I picked up a few weeks ago. It’s been quite the experience with the wiring on this tractor. I was trying to fix someone else’s mistakes. Yesterday was I guess you called a head banger or scratcher. Be cause everything I did did not work. So today I guess you could call it a premonition early in the morning. I decided to use a jumper wire form the solenoid to the wire on the starter from the Solenoid.. Bingo it worked. So Squonk AKA Mike was interested how this came about. So I told him. He said the wire was bad. I thought how a 6ga wire could be bad with no bare spots and the contacts were clean and shiny. So as I changed the wire witch is a 4ga brand new. Bingo I have contact. I have had a few of this model in the past. So I guess you could say don’t assume everything is good just by looks. I am not good with electrical never took the time to learn it.. if you read this and liked it say something or give me a thumbs up. Enjoy all your projects. This is something apparently I didn’t follow when I was doing it. 5 1 Share this post Link to post Share on other sites
ebinmaine 79,085 #2 Posted 1 hour ago 12 minutes ago, Retired Wrencher said: how a 6ga wire could be bad with no bare spots and the contacts were clean and shiny Internal corrosion 3 Share this post Link to post Share on other sites
