1989 c-414 starter removal

[oldlineman 1,772]

Just a quick question, do you have to remove the oil fill dipstick tube in order to remove the starter? 1989 c-414, kohler M 12. Thank you 

[953 nut 68,127]

               

 Yes, though someone on here has probably managed to do so without removing it. Now that I have given a definitive answer somebody has to controdict it.  

[gwest_ca-(File Mod) 12,416]

Took a while to find it. #12 & #13

[Bill D 3,062]

Worst starter design ever.  K series is much better. 

[squonk 47,702]

22 minutes ago, Bill D said:

Worst starter design ever.  

Cadillac Northstar says "Hold my beer!" 

 

[Bill D 3,062]

57 minutes ago, squonk said:

Cadillac Northstar says "Hold my beer!" 

 

I stand corrected!

[Ed Kennell 46,792]

6 hours ago, oldlineman said:

Just a quick question, do you have to remove the oil fill dipstick tube in order to remove the starter? 1989 c-414, kohler M 12. Thank you 

Yes, and due to the tight clearance to the starter 12v. lug, I install a rubber sleeve on the fill tube to provide insulation.

[adsm08 4,893]

1 hour ago, squonk said:

Cadillac Northstar says "Hold my beer!" 

 

 

The 5-cylinder in the Colorado was even worse.

 

Same stupid spot, much harder to remove the intake.

[oldlineman 1,772]

Thank you everyone, I sort of figured that it had to come off, now for the next question will oil come out if you take said fill tube off without draining engine oil? Thanks

[Achto 32,243]

7 minutes ago, oldlineman said:

now for the next question will oil come out if you take said fill tube off without draining engine oil?

 

The oil level should be below the dip stick housing. Should be able to remove it with out leaking oil.