Possible C160

[Fj40z 66]

14 minutes ago, AlexR said:

Eb is right on, it's a 1976 and yes it was originally a C160 8 speed

 

Whats the breakdown on the numbers that lets you know that? Like to learn

[oliver2-44 11,488]

8 hours ago, Fj40z said:

 

Seller had replaced both rear axle seals not long ago as well. 

Nice looking Horse! 
Sometimes a leaking rear axle seal can indicate other issues.
Jack up the tractor, remove the rear wheels and see if you can move the axle hubs up/down, side to side. Any movement more than a tiny tiny amount can indicate worn axle bearings and or axles. New seals usually don’t last if the bearings are worn. 
In an out movement is ok 

Edited 4 hours ago by oliver2-44

[Fj40z 66]

2 minutes ago, oliver2-44 said:

Nice looking Horse! 
Sometimes a leaking rear axle seal can indicate other issues.
Jack up the tractor, remove the rear wheels and see if you can move the axle hubs up/down, side to side. Any movement more than a tiny tiny amount can indicate worn axle bearings and or axles. New seals usually don’t last if the bearings are worn. 
In an out movement is ok 

Thank you sir! I’ll sure do that as soon as I get a chance